Electrolux Twins Trim Kit Resource Guide

Instructions: A20113801

4 of 5

INSTRUCTION SHEET

Models: FPFU19F8WF

FPRU19F8WF

EI33AF80WS

EI33AR80WS

Freezer Connections

NOTE: The freezer water valve and the connect-

ing harness are not used when this kit is installed

for ltered water provided by the paired refrigera-

tor.

1. Disconnect and remove the 10” green water

line by pushing upward on the port tab, while

pulling out the line.

TAB

2. Feed the green water line (A) coming from

the refrigerator along with the wiring harness (E)

through the opening of the access cover.

3. Push the green water line into cabinet tube

connection.

4. Connect the harness (E) from the refrigerator

to the connector for the freezer. Locate wiring

harness support clip at top of refrigerator ma-

chine compartment (F), and insert wiring harness

to secure.

6. Reinstall access cover for both units.

5. Disconnect the harness connection from the

water valve. Not required. Water will be supplied

from the refrigerator water valve.

(E)

(A)

(E)

(F)