Wiring Diagram

NOTICE - This service data sheet is intended for use by persons having electrical
and mechanical training and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade. The manufacturer cannot
be responsible, nor assume any liability for injury or damage of any kind arising
from the use of this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important
that safe servicing practices be observed. The following are examples, but without
limitation, of such practices.
1. Before servicing or moving an appliance remove power cord from electrical outlet,
trip circuit breaker to OFF, or remove fuse.
2. Never interfere with the proper installation of any safety device.
IMPORTANT
DO NOT REMOVE THIS BAG
OR DESTROY THE CONTENTS
WIRING DIAGRAMS AND SERVICE
INFORMATION ENCLOSED
REPLACE CONTENTS IN BAG
p/n A00498603 Rev B (1603)
SERVICE DATA SHEET
30” INDUCTION COOKTOP
3. GROUNDING: The standard color coding for safety ground wires is GREEN or
GREEN WITH YELLOW STRIPES. Ground leads are not to be used as current
carrying conductors. It is extremely important that the service technician
reestablish all safety grounds prior to completion of service. Failure to do
so will create a potential safety hazard.
4. Prior to returning the product to service, ensure that:
 •Allelectricconnectionsarecorrectandsecure.
 •Allelectricalleadsareproperlydressedandsecuredawayfromsharpedges,
high-temperature components, and moving parts.
 •Alluninsulatedelectricalterminals,connectors,heaters,etc.areadequately
spaced away from all metal parts and panels.
 •Allsafetygrounds(bothinternalandexternal)arecorrectlyandsecurely
reassembled.
Indicated % Power Notes
0 0 Off
Lo 7 Keep Warm
1.5 9 -
2 12 -
2.5 15 -
3 17 -
3.5 18 -
4 19 -
4.5 20 -
5 21 -
5.5 25 -
6 31 -
6.5 38 -
7 45 -
7.5 50
8 54 -
8.5 59
9 64 -
9.5 80
Hi 100
Pb 138-152 PowerBoost
BC3 TO USER INTERFACE BOARD
Á PLAQUETTE D'INTERFACE DE UTILISATEUR
THERMAL CUT-OUT
COUPE-CIRCUIT THERMIQUE
GENERATOR/POWER BOARD 1 (LEFT)
CARTE GENERATEUR 1 (GAUCHE)
GENERATOR/ POWER BOARD 2 (RIGHT)
CARTE GENERATEUR 2 (DROITE)
BC3
B81
BC4
B71
TAB1
TAB2
BC1
TAB102
TAB101
BC5
BPL1
BPL2
BPN2
BPN1
BPE03
BC3
B81
BC4
B71
TAB1
TAB2
BC1
TAB102
TAB101
BC5
BPL1
BPL2
BPN2
BPN1
BPE03
THERMAL CUT-OUT
COUPE-CIRCUIT THERMIQUE
ID JUMPER: ADDRESS 2
DO NOT CONNECT BLACK JUMPER TO BC1 OR BC5
IDENTIFICATEUR: ADRESSE 2 NE PAS
BRANCHEZ EN UTILISANT FAISCEAU-FIL NOIR BC1 OU BC5
ID JUMPER: ADDRESS 1
DO NOT CONNECT BC5
IDENTIFICATEUR: ADRESSE 2 NE PAS BRANCHER BC5
Electronic Surface Element Control (ESEC)
ThiscooktopisequippedwithanElectronicSurfaceElementControl(ESEC),
which precisely controls the smoothtop cooking elements at multiple settings. For
the user, the elements are operated by the knobs. The control settings are shown
in 2-digit displays.
Hot Surface display message - If any of the induction elements are hot, the hot
surfacemessage(HE)willdisplayandremainONuntilthecooktopcools.
Replacing an induction element
Whenever replacing any induction element use only the screws supplied with the
range to secure the element to the mounting panel. Never use any other type of
screw to attach the induction element.
* Please note: Electronic boards are very sensitive to static electricity. Static elec-
tricity can permanently damage electronic boards. Before handling these parts, be
sure to drain static electricity from your body by properly grounding yourself.