WELCOME & CONGRATULATIONS Product Registration Register Your Product The PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to PA ir Electrolyte Home Products. 3 £ pe Serial Plate Location Cook top Serial Plate Location Please record your model and serial numbers below for future reference.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. DEFINITIONS A This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death, 4) WARNING This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
IMPORTANT SAFETY INSTRUCTIONS AL wane Never use your appliance for warming or heating the room. « DO NOT TOUCH SURFACE UNITS OR AREAS HEAR THESE UNITS, Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns, During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cook top and areas facing the cookie. = Wear Proper Apparel.
COOK TOP FEATURES Read these instructions carefully before using the cook top Left Rear Induction Element 1. 2. Left Front Induction Element 1 CAUTION 3. Center Front Induction Element (36” mode! ably) : 4, Center Rear (30” model only) or Right Rear Inductee Cooking Zones may appear to be cool while turned son Element (36” model only) ON and after they have been turned OFF. The glass 5. Right Front Induction Element surface may be HOT from residual heat transferred 6.
BEFORE USING THE COOK TOP Induction Cook top Features A COOLER COTOPAXI unique feature of the Induction Cook top is whether turned ON or OFF, the cook top surface remains cooler than standard ceramic cook tops. The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface may be HOT from residual heat transferred from the cookware and burns may occur.
Cookware Recommendations Be sure to follow the following recommendations for using cookware as shown: INCORRECT CORRECT Cookware not centered | ® Cookware centered on Cooking Zone surface. correctly on Cooking Zone surface. « = Flat pan bottom & straight sides. «Curved or warped pan bottoms or sides. fo— Min. giz «Pan does not meet the minimum size required for the Cooking Zone used. = Pan size meets or exceeds the recommended minimum size for the Cooking Zone.
SETTING INDUCTION SURFACE CONTROLS The Electronic Surface Element Control The Electronic Surface Element Control includes digital display windows, The control provides a numeric digital setting for the surface element positions on the cook top, These settings work the same way as normal knob setting indicators work except the settings are displayed in digital windows (Figs. 1 thru 8). The available Display Settings The control provides various heat levels from Hi (Fig. 2) to Lo {Fig. 4) and OFF (Fig. 1).
SETTING INDUCTION SURFACE CONTROLS Operating the Single Induction Surface Elements The cook top is equipped with 3 (or 4) single induction surface elements: the RIGHT FRONT, CENTER and REAR positions {Figure 1 and 2), To Operate the Induction Surface Elements 1. Place the correctly sized cookware of the proper material on the induction surface element. 2. Push in and turn the surface control knob in either direction to the desired setting (Figure 3).
SETTING INDUCTION SURFACE CONTROLS Operating the Bridge Induction Surface Radiant Element The cook top is equipped with a "BRIDGE" surface induction element located at the left front and rear (See Figures 1 & 2} positions. The Bridge can be used when cooking with rectangular (like a griddle) or oval shaped cookware. The induction element will maintain an even temperature setting across both portions of the Bridge.
SETTING INDUCTION SURFACE CONTROLS Power Management In order to give you more flexibility, your induction cook top is equipped with more cooking zones than the number of induction generators, Each of those generators is assigned to power a specific cooking zone, One or two cooking zones are assigned to each generator.
CARE & CLEANING Cleaning Various Parts of Your Cook top Before cleaning any part of the cook top, be sure all controls are turned OFF and the cook top is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE DIFFICULTY AND EXTENT OF A MAJOR CLEANING LATER, How to Clean Wipe the control panel clean after each use. Before cleaning the control panel, tum all controls to OFF and remove the control knobs.
Cleaning Recommendations for the Ceramic Glass Cook top £4) CAUTION Before cleaning the cook top, be sure the controls are turned to OFF and the cook top is COOL. 4k warning DO NOT use a cook top cleaner on a hot cook top. The fumes can be hazardous to your health, and can chemically damage the ceramic glass surface.
BEFORE YOU CALL (Solutions to Common Problems) 23 IMPORTANT Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance, OCCURRENCE Entire cook top does not operate. POSSIBLE CAUTIOUSNESS House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. If the problem is a circuit overload, have this situation corrected by a qualified electrician.
OCCURRENCE Cooking Zone LED continuously flashes. BEFORE YOU CALL {Solutions to Common Problems) POSSIBLE CAUSE/SOLUTION Induction Cook top pan detection sensors do not see the correct cookware, Test with a magnet to be sure cookware is made with Induction compatible material. Cookware has been removed from the Cooking Zone without turning the Cooking Zone OFF Place cookware back on to the Cooking Zone or if finished cooking turn off the affected Cooking Zone.
MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolyte will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.