FRIGIDAIRE Packac Air Conditioner Feai
This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.
Product Registration Record Your Hodei and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No, Serial No Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.
Operating Instructions (continued) TO CHANGE TEMPERATURE SETrlNG; tamp/timer YOU WILL SEE: temp/timer auto auto hi DO THIS: [] reed mad PRESS A TO RAISE lo to PRESS V TO LOWER Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE; temp/timer temp/timer heat heat [] cool cool DO THIS: energy saver energy PRESS MODE BUTTON fan only [] saver fan only CHOOSE FAN ONLY Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.
Operating Instructions (continued) CHECK FILTER FEATUREr YOU WILL SEE: temp/timer temp/timer heat heat cool cool [] energy saver Dn only [] energy saver [] fen only PRESS FILTER DO THIS: RESET BUTTON --L_ Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.
Operating Instructions (continued) REMOTE SENSING FEATURE (on some models). LIGHT pulsing ( On & Off intermittently o ). temp/timer heat cool energy _L DO THIS: saver fan only PRESS REMOTE SENSING remote START BUTTON _ sensing NOTE: Remote display is actual temperature at remote control only NOTE: Unit display shows the set temperature Note: This feature can be activated from the remote control ONLY, the unit must be in a cooling mode.
Operating Instructions (continued) TO CHANGE TEMPERATURE YOU WILL DISPLAY: SEE; temp/timer DO THIS: PRESSAND HOLD THE UP/DOWN BUTTONS TOGETHER FOR 3 SECONDS Note: The control is capable of displaying temperature TO TURN in degrees Fahrenheit or degrees Celsius. UNIT OFF: hi YOU WILL SEE: hi m reed reed lo lo 1 DO THIS: PRESS ON/OFF BUTTON Note: When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to dissipate residual heat within the unit.
Operating Instructions (continued) The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheel until the desired direction is obtained. AUGER WHEEL Care and Cleaning Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards, Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary.
Before calling forservice, reviewthislist.It maysaveyoutimeandexpense. Thislistincludes common occurrences thatarenot theresultofdefective workmanship or materials inthisappliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet.
Your appliance is covered by a full one-year warranty and a limited 2-5 year warranty(sealed system). For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.