FRIGIDAIRE Air Conditioner Featu operating Instructi(
This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.
Product Registration Record Your Hodei and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No, Serial No Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Normal Sounds High pitched Chatter Today's high efficiency compressors may have a high pitched chatter during the cooling cycle.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote. EXHAUST SELECTOR cool energy saver __ closed ADJUSTS TEN PERATURE OR TIME DISPLAYS TEMPERATURE/TIME A L.
Operating Instructions (continued) TO CHANGE TEMPERATURE SETTING= temp/timer YOU WILL temp/timer auto A auto [] hi med A =,hi mad _ SEE: lo V o V o Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C). If you want the display to read the actual room temperature. See "To Operate on Fan Only" section on Page 6.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE: temp/timer temp/timer A cool [] energysaver Iononly exhaust A cool energysaver fanonly[] V open '\ exhaust V open Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on DO THIS; some models.
Operating Instructions (continued) YOU WILL TIMER, = DELAY STOP / START FEATURE temp/timer temp/timer auto =, hi A V o i _ FIRST DO THIS: PRESS TIHER BUTTON \ THEN DO THIS: PRESS UP/DOWN SET BUTTONS CHECK FILTER FEATUREr YOU WILL [] hi reed ,o V \l auto A med lo % SEE HOW MUCH TIME IS CHOSEN: ® Note: For Delay Stop, the unit must be in the On position. Note: For Delay Start, the unit must be in the Off position.
Operating Instructions (continued) TO CHANGE TEMPERATURE DISPLAY: YOU WILL SEE: temp/timer A DO THIS; PRESS AND HOLD THE UP/DOWN BUTTONS -TOGETHER FOR 3 SECONDS , Note: The control is capable of displaying temperature TO TURN V in degrees Fahrenheit or degrees Celsius.
Operating Instructions (continued) 4-WAY LOUVERS The 4-Way air directional louvers allow you to direct the air flow Up or Down and Left or Right throughout the room as needed, llllll Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards, Care and Cleaning Air Filter Cleaning The air filter should be checked necessary.
Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet.
Yourappliance iscovered byafullone-year warranty anda limited 2-5yearwarranty(sealed system). Foroneyearfromyour original dateofpurchase, Electrolux willpayallcostsforrepairing orreplacing anypartsofthisappliance thatprove to be defective inmaterials orworkmanship whensuchappliance isinstalled, usedandmaintained inaccordance withtheprovided instructions.