Complete Owner's Guide

8
DOOR REVERSAL
7. Take o the upper door. Using a
Phillips screw driver, take out the
screw from the middle hinge. Take o
the lower door.
8. Move the hinge hole covers from left
side to right side.
9. Remove the adjustable feet from
both sides. (See Figure A.) Remove
the bottom hinge. (See Figure B.)
Figure A Figure B
10. Remove the bottom hinge pin with
adjustable wrench, turn bracket over
and replace on opposite side.
11. Attach the bottom hinge bracket
to the unit. (See Figure A.) Replace
both adjustable feet. See Figure B.)
12. Remove aid-closers from bottom of
upper and lower doors, then take
new aid-closers from accessory bag
and install them to left side.
Figure A Figure B
13. Detach the refrigerator and freezer
door gaskets and then attach them
after rotating.