User and Care

11
CONTROLS AND SETTINGS
Normal Mode
The default mode is Normal Mode. In this mode, you can set the temperatures of
both Refrigerator and Freezer compartments.
Door Open Alarm
If door is left open for more than 60 seconds, alarm will sound. Close door
immediately to conserve energy.
Error Codes
If there is a fault, the display will show ERROR codes.
Error Fault Codes
Signal transmission between control board and main board.
Probably defects of harness (wire and connectors), main board
or control board
E0
Temperature sensor of refrigerator compartment E1
Temperature sensor of freezer compartment E2
Defrost temperature sensor in freezer compartment E3
Defrost heater or the fuse connected with heater E5
CHILLDRAWER Temperature Control
• Temperatures in the CHILLDRAWER can be adjusted based on
the type of food to be stored.
• To decrease the temperature, push the knob upward from the
bottom.
• When the knob is placed at the “Cold” position, the
CHILLDRAWER can be functioned as a crisper zone and
maintain the appropriate temperature and humidity for fruits and
vegetables.
• When the knob is placed at the “Coldest” position, it is suitable
for short-term storage of fish or other fresh food. The food will
be kept fresh but not frozen which makes it the best choice for
storing fresh food.
• Tip: When you choose “Coldest” position, it is recommended
to set the refrigerator temperature below 4 °C in order to keep
food the freshest.
Coldest
Cold
CHILLDRAWER
Call service to report error codes.