Owner Manual

Replacing the Oven Light

CAUTION

Be sure the oven is unplugged and all parts are

cool before replacing the oven light.

Figure 21: Oven light

Replacing the oven interior light bulb:

The interior oven light is located at the rear of the

oven cavity and covered with a glass shield. The

glass shield must be in place whenever the oven is

in use (Figure 21). Only use lamps with the same

speciﬁcations.

1. Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

2. Turn electrical power o at the main source or

unplug the appliance.

3. Turn the lamp glass cover counterclockwise to

remove it.

4. Clean the glass cover.

5. Replace the lamp with a suitable 300°C heat-

resistant lamp.

NOTE

Do not allow your ﬁngers to touch the new bulb

when replacing. This will shorten the life of the

bulb. Use a paper towel or cotton glove while

handling the new bulb when installing.

6. Replace glass oven lamp glass cover.

7. Turn power back on again at the main source

(or plug the appliance back in).

CARE AND CLEANING