Use and Care

ManualsBrandsFrigidaire ManualsRefrigeration33 Inch Side by Side Refrigerator with 22.2 Cu. Ft. Capacity, Adjustable Glass Shelves, Adjustable Door Bins, Capacitive Touch Controls, Ice Maker, Filtered Water Dispenser, cUL/UL Listed, and NSF Certified: White

Table Of Contents

DOOR HANDLE INSTALLATION

1. Remove handles from carton and

any other protective packaging.

2. Position the freezer handle end caps

over the upper and lower pre-in-

stalled shoulder bolts (A) that are

fastened into door, ensuring the

holes for the set screws are facing

toward the refrigerator door.

3. While holding the handle ﬁrmly

against door, fasten the upper and

lower Allen set screws (B) with the

supplied Allen wrench.

4. Repeat steps 2 and 3 to install

refrigerator handle. Ensure the holes

for the set screws are facing towards

the freezer door.

Freezer

Upper

End Cap

Door

Refrigerator

Upper

End Cap

Door

Refrigerator

Lower

End Cap

Door

Freezer

Lower

End Cap

Door

Ensure Handle Set Screws are Facing Each Other with Doors Closed

CAUTION

Wear gloves and safety goggles and

use extreme CAUTION when installing

these handles. The rounded end of the

handles may be sharp (some models).

IMPORTANT

To ensure proper installation of handles,

please review these instructions and il-

lustrations thoroughly prior to installing

the handles.



NOTE

Tighten and sub-ﬂush all set screws (place the Allen set screw just below the sur-

face of the end cap) of the handle end cap. Draw the end caps tight to the freezer

and refrigerator doors with no gaps. To avoid scratching the metal door, keep the

door open while torquing down the set screws.