Use and Care

15
CONTROLS AND SETTINGS
Cube
Press the Cube button to get cubed ice. A white LED light will indicate
the mode is selected. Press glass against the ice dispensing paddle as far
up as possible to catch all the ice.
Crush
Press the Crush button to get crushed ice. A white LED light will indicate
the mode is selected. Press glass against the ice dispensing paddle as far
up as possible to catch all the ice.
Light
Press the light button to turn on the dispenser light. A white LED light
will indicate the dispenser light is on. Press again to turn the light o.
Water
To operate the water dispenser, press a glass against the Water
dispensing paddle. To stop dispensing water, pull the glass away from
the dispensing paddle. Dispensed water is not cold. For colder water, add
crushed ice or cubes before dispensing water.
Water
Filter
Status
When you need to order a new water filter, the side door UI will change
to the Order status. When you need to replace the water filter, the Side
Door UI will change to the red replace status and the front UI will display
Replace Water Filter. After you change the filter, hold the Water Filter
button for 3 seconds to reset.
Air
Filter
Status*
When you need to order a new air filter, the Side Door UI will change to
the Order status. When you need to replace the air filter, the Side Door
UI will change to the red Replace status and the Front UI will display
Replace Air Filter. After you change the filter, hold the Air Filter button
for 3 seconds to reset.
*Only on some models
Front of Door User Interface
NOTE
Your appliance may have some or all of the features listed below. Become familiar
with these features and their use and care.