User Manual

Getting started
with your
top freezer
refrigerator
Before you start
Set up your refrigerator
Remove the tape and glue residue from surfaces before turning on the refrigerator. Choose a place
near a grounded electrical outlet, allowing for clearances for ease of installation, proper circulation,
and plumbing and electrical connections.
Before operating for the first time
After you remove all of the packaging materials, clean the inside of your refrigerator before using it.
See the CARE AND CLEANING section in your Use & Care Manual.
You’re in control
Your refrigerator controls
It’s easy! When first turning your appliance on, adjust the controls to the factory set Recommended.
After 24 hours, adjust the controls in small increments (if desired), allowing the temperatures to stabilize.
The refrigerator control changes temperatures in both the refrigerator and the freezer. The freezer control
moves the damper in the freezer. Adjust the freezer control toward Cold to open the damper, making the
freezer temperature warmer. Adjust it toward Coldest to close the damper, making the freezer colder.
Refrigerator Control
Freezer Control
1
2
3
4
2
4
3
1
Adjusting the refrigerator temperature control
to OFF turns o the compressor and prevents
the refrigerator from cooling, but does not
disconnect the power to the light bulb and
other electrical components. To turn o power
to your refrigerator, you must unplug the
power cord from the wall outlet.
2
For warmer temperatures, adjust the
temperature toward Cold.
3
Both the refrigerator and freezer controls can
be left at the factory preset (Recommended)
or adjusted as desired.
4
For colder temperatures, adjust the setting
toward Coldest.
Remember
For the best circulation, do not block cold air vents with food.
A17275504 (2210)