Use and Care Manual

10
DOOR REMOVAL/REVERSAL
10. Using a Phillips™ screwdriver, re-
move the screw from the door stop
(see Figure 4A).
11. Using a flat head screwdriver, gently
pry the door stop o the bottom
hinge pin (see Figure 4B).
12. Using a ratchet with a 12 mm socket,
remove the bottom hinge pin (see
Figure 4C).
13. Reinstall the hinge pin into the outer
hole and tighten with a ratchet and a
12 mm socket (see Figure 5A).
14. Flip door stop over 180° (see Figure 6B)
and reinstall onto the opposite hinge
over the hinge pin (see Figure 5C).
With the assistance of another
person, tilt the appliance back, to
have access to the bottom hinge.
Loosen the hinge screws slightly.
flip the door stopper, and place it
on top of the bottom hinge, making
adjustments until the stopper is flush
against the unit. Tighten all screws.
(See Figure 6)
15. Secure the door stop with a screw
(see Figure 5D).
Door
Stop
Door
Stop
Screw
Bottom
Hinge
Pin
Figure 4
A
B
C
Figure 5
A
B
C
D
Figure 6