Use and Care Guide

6
CONTROLS AND SETTINGS
IMPORTANT
To avoid damaging the compressor, please
do not turn on the appliance again within 5
minutes after turning it off.
Display
Lock/
Unlock
Lighting Temp.
Up
Display
Window
Temp.
Down
Temperature Display
• The temperature is displayed digitally. The
digital display shows the set temperature.
• If the temperature probe is out of order
or some other error occurs, the display
window may show a code such as “E1”, “L”
or “H” instead of the actual temperature
and a continuous beeping sound will be
heard. In case this happens, the appliance
is designed to keep periodical running
of compressor and fans which helps to
maintain an adequate temperature inside
cabinet to protect your stored wines, but
it is recommended that you have your unit
serviced as soon as possible.
Power ON/OFF
• When the appliance is plugged into a
power outlet, it powers on automatically.
• After initial startup the display will default
to 54°F (12°C).
Lock/Unlock the Display
• Press and hold lock button for
3 seconds to lock display. All
features will be locked except
Lock/Unlock button. If any other
button is pressed, the display will beep 3
times.
• To unlock the display, press and hold lock
button for 3 seconds.
Interior Lighting ON/OFF
• Touch the light button to turn ON/
OFF the interior LED lighting.
• The light will stay on until it is
manually turned off or the door is
closed.
Display Mode
• Press the light button once and wait
until light turns off, then press the same
button a second time. The light now stays
on, even with the door closed, until it is
manually turned off.