Beverage Center use & care Important Safety information.....................2 Features...............................................................8 Installation......................................................... 4 Care and Cleaning...........................................9 Saving Energy...................................................6 Troubleshooting..............................................10 Controls and Settings.....................................7 Limited Warranty.............
IMPORTANT SAFETY INFORMATION Read and Save These Instructions Use your Beverage Center only as instructed in this guide. These instructions are not meant to cover every possible condition and situation that may occur. Use common sense and caution when installing, operating, and maintaining any appliance. Record Your Model and Serial Numbers Record the model and serial numbers in the space provided below. The serial plate is located on the upper left of the interior liner or on the back of the unit.
IMPORTANT SAFETY INFORMATION Electrical Information • The Beverage Center must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult a qualified electrician.
INSTALLATION This Use & Care Manual provides general operating instructions for your model. Use the appliance only as instructed in this Use & Care Manual. Before starting the appliance, follow these important first steps. Location • Choose a place near a grounded electrical outlet. Do Not use an extension cord or an adapter plug. • For optimal performance, we recommend you install the unit where the ambient temperature is 70°F (21°C) to 78°F (26°C).
INSTALLATION cabinet. Remove the three button plugs from lower LH corner and transfer to holes where bottom hinge was just removed. Reversing the door swing The glass door can be opened from left to right and vice versa. Should you desire to change the opening direction, please follow these instructions. 5 NOTE All parts removed must be saved to do the reinstallation of the door. 5. 1. Remove top cap. Remove the three screws that hold the upper hinge (right side) to the top of the cabinet.
SAVING ENERGY • Install the Beverage Center in the coolest part of a dry and ventilated room, out of direct sunlight and away from heating ducts or registers. Do not place the Beverage Center next to heat-producing appliances such as a range, oven or dishwasher. • Level the Beverage Center so the door closes tightly. • Do not over crowd the Beverage Center or block cold air vents. Doing so causes the Beverage Center to run longer and use more energy.
CONTROLS AND SETTINGS 7 Cool Down Period For best performance, allow 4 hours for the unit to cool down completely. The Beverage Center runs continuously for the first several hours. Temperature Control Indication of Temperature in Lower Chamber : Press this button once and the temperature increase 1°C. : Press this button once and the temperature decrease 1°C.
FEATURES Adjustable Interior Shelves Multi-position adjustable interior shelves can be moved to any position for larger or smaller packages. The shipping spacers that stabilize the shelves for shipping should be removed and discarded. The Beverage Center comes equipped with three glass shelves. Interior Light (Some models) The light comes on automatically when the door is opened. The light can also be turned on and off by pressing the Light button on the control panel.
CARE AND CLEANING Cleaning the Beverage Center Vacation and Moving Tips Before cleaning, turn the temperature control to OFF, unplug the unit, and remove the bottles. Clean your appliance once a year or as needed. Vacations: If you will not use the appliance for several months: • 9 Remove all wine bottles and unplug the power cord. Inside: Wash inside surfaces with a • Clean and dry the interior thoroughly. solution of 2 tbsp of baking soda in one • Leave the door open slightly, qt (1.
TROUBLESHOOTING 1-800-374-4432 (United States) 1-800-265-8352 (Canada) PROBLEM CAUSE Visit our web site at Frigidaire.com CORRECTION BEVERAGE CENTER OPERATION Appliance does not run. Appliance runs too much or too long. • The unit is plugged into a circuit with a ground fault interrupt. • Temperature control is in the OFF position. • The unit may not be plugged in, or the plug may be loose. • The house fuse is blown or the circuit breaker is tripped. • Power outage. • Use another circuit.
TROUBLESHOOTING PROBLEM CAUSE 11 CORRECTION SOUND AND NOISE (cont’d) Longer sound levels when the compressor comes on. • The appliance operates at higher pressures during the start of the ON cycle. • This is normal. Sound will level off or disappear as the unit continues to run. Popping or cracking sound when the compressor comes on. • Metal parts undergo expansion and contraction, as in hot water pipes. • This is normal. Sound will level off or disappear as the unit continues to run.
LIMITED WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1.
welcome home Our home is your home. Visit us if you need help with any of these things: owner support accessories service registration (See your registration card for more information.) Frigidaire.com 1-800-374-4432 Frigidaire.
