User manual

PROBLEM POSSIBLE SOLUTION
You cannot set an op-
tion.
• Make sure that you press only the wanted touch button(s).
After the check, activate the appliance. The
programme continues from the point of
interruption.
If the problem occurs again, contact the
Authorised Service Centre.
If the appliance shows other alarm codes
(the indicator of button flashes in red).
Deactivate and activate the appliance. If
the problem continues, contact the
Authorised Service Centre.
Service
We recommend the use of original spare
parts.
When contacting the Authorised Service
Centre, make sure that these data are
available. You can find the information on
the rating plate: model, PNC and Serial
Number. (Mod., Prod. No., Ser. No.)
24
TROUBLESHOOTING