OWNER'SGUIDE READANDSAVETHESEINSTRUCTIONS AIR CONDITIONER ROTARY CONTROL P/N 309000823 (??/99)
ROOM AIR CONDITIONER Your product is protected WARRANTY by this warranty Your appliance is warranted by White Consolidated Industries.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On most models, the serial plate is located on the outside of the cabinet. On some models, remove the filter and look at the bottom edge of the air conditioner behind the front grille for the model and serial numbers. Reading these numbers may be easier by using a flashlight or by removing the cabinet front as instructed under "Care and Cleaning." Model No. Serial No.
Read all instructions before using this air conditioner. Important Safety Instructions _'!_J_rl±_l It_1I_[€ For Your Safety Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. _'!_J_rl±_l It_1I_[€ Avoid fire hazard or Do not use an extension _. cord or an adaptor plug. Do not remove any prong from the power cord. _[ Do not, under _:&l/ any circumstances, _.
Front Installation Some models are shipped in a removable sleeve, please follow the supplied Installation Instruction before installing the Decorative front and accessories. Installing the Vent Control (on some models) The vent control handle is included in the decorative front kit (Fig. 3). The handle must be installed before the decorative front is attached. See illustration below. 1. Insert the handle with the "etchings (Vent/Air)" facing to the left. 2.
Using Air Conditioner To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETYINSTRUCTIONSbefore operating this appliance. To begin operating the air conditioner, follow these steps: NOTE>If the air conditioner is turned off, wait 3 minutes before restarting. This allows pressure inside the compressor to equalize. Failure to follow these instructions may cause inefficient operation. 1. Plug in the air conditioner.
Air Conditioner Features (continued) Automatic Thermostat (some models) When a COOL or HEAT (some models) setting is selected, the thermostat controls the amount of cooling or heating by automatically turning the cooling compressor or heater on and off in response to the room temperature. Set the thermostat at the highest number for the coldest setting for cooling, and the lowest number for warmer settings in the HEAT mode.
Air Conditioner Features (continued) Air Directional Louvers Air directional louvers control air flow direction. Your air conditioner has one of the louver types described below. 2-Way Louvers Louvers at the top front of some air conditioners permit side-to-side adjustment of airflow direction. Move the levers to direct air to either the left or right. The left lever adjusts the left half of the louver and the right lever adjusts the right half of the louver.
Avoid Service Checklist OCCURRENCE Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. SOLUTION Air conditioner will not operate, Wall plug disconnected. Push plug firmly into wall outlet. House fuse blown or circuit breaker tripped.-Replace fuse with time delay type or reset circuit breaker. Selector Control COOL-setting. in OFF position.
