Owner Manual

21
Removing Auto CrispSeal Drawer
STORAGE FEATURES
Drawers
The refrigerator includes a variety of storage
drawers.
Auto CrispSeal Drawer (with automatic
humidity control)
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce. Crispers
have an auto humidity control on the side of
each crisper under the humidity control cover.
To remove the auto humidity control
membrane for cleaning:
1 Reach to back of humidity control cover.
2 Pull up on cover.
3 Pull cover towards back of cabinet and
remove.
4 Clean humidity membrane with hot soapy
water.
5 Replace membrane and cover by reversing
the steps above. Repeat for both crispers.
Removing Auto Humidity
Control Membrane
Crisper
Crisper
Auto
Humidity
Membrane
Opening SnackZone
Recessed Snack Drawers
To remove the Auto CrispSeal drawer for
cleaning:
1 Pull the drawer out until it stops.
2 Lift the front slightly and remove the
drawer.
SnackZone - Recessed Snack Drawers
These drawers are ideal for storage of deli
meats and cheeses.
To open: slide back the cover to allow access
to the drawers.
NOTE
Frigidaire does not recommend replacing the
auto-humidity membrane unless it becomes
damaged or ruined. If the membrane
becomes soiled, it can be washed with soap
and water. Ensure membrane is dry before
replacing in unit.