Tus neeg siv phau ntawv

ManualsBrandsFrigidaire ManualsCookingGallery 36" Induction Cooktop

WITH YOUR

INDUCTION COOKTOP

Started

GETTING

BEFORE YOU START

COOKTOP FEATURE HIGHLIGHTS

TempLock

TempLock takes the consistent heat of

induction cooking to the next level.

Press the TempLock indicator, then

press the number slider to select a

cooking level (1=Low, 9=High).

Once cool food is added to a hot pan, the cooktop

senses a temperature change and will use extra

power to maintain the temperature for the set

cooking level.

NOTE: This feature works best with heavy, sturdy,

high-quality cookware.

Bridge

The Bridge feature allows you operate two

cooking zones simultaneously.

Use Bridge when cooking with a griddle.

Place the griddle on both of the left zones,

then press the Bridge Indicator.

Serve Warm

Serve Warm will set all of the cooking

zones to a low power level to keep foods

warm.

Press the Serve Warm indicator after your

food is done cooking, then cover your

cookware with a lid.

Choosing the right cookware

For induction heating to work, cookware needs to be compatible with the cooking zones.

Look for an induction symbol on the bottom of pots and pans.

Using the right size cooking zone

The markings on the cooking zone show the minimum and maximum pan size. For

the fastest and most even heating, use the cooking zone that best ﬁts the cookware

bottom. It’s ok for the pan to be a little bigger than the cooking zone.

Pan sensing

If the cooking zone does not become active, the zone isn’t sensing the pan. Make sure

the cookware is induction-ready, centered on the cooking zone, and not too small for

the zone you’re using.

PAN TOO SMALL PAN JUST RIGHT

COMPATIBLE INCOMPATIBLEMAYBE

If the cookware isn’t marked as induction-ready, check

the bottom and sides with a magnet. If the magnet sticks

ﬁrmly to the cookware, then it will work on the cooktop!

Cookware bottoms should be ﬂat, level, and clean. Sturdy

cookware with solid bottoms work best.

INDUCTION BASICS

Visit Frigidaire.com to see our lineup of induction-ready cookware!

Remove all packaging material and tape.

Apply a ceramic cooktop cleaning cream to the cooktop and bu with a clean paper towel to help

prevent scratches.

A23490701 Rev A (2110)

Summary of content (2 pages)

PAGE 1
GETTING Started WITH YOUR INDUCTION COOKTOP BEFORE YOU START Remove all packaging material and tape. Apply a ceramic cooktop cleaning cream to the cooktop and buff with a clean paper towel to help prevent scratches. INDUCTION BASICS Choosing the right cookware For induction heating to work, cookware needs to be compatible with the cooking zones. Look for an induction symbol on the bottom of pots and pans.
PAGE 2
COOKTOP CONTROLS 7 8 Timer 2 ON OFF 1 9 P 8a LOCK 1 ON OFF 1 9 P ON OFF 1 9 P 9 ON/OFF ON OFF 1 9 P ON OFF 8b 1 9 P POWER 4 1. 8c 3 5 6 Power: Press to turn on or turn off the cooktop. 2. Lock: Lock the cooktop controls to prevent accidental activation of cooking zones. 3. Cooking Zone Indicator: The LEDs (4 or 5 depending on the model) indicate cook zones. The one corresponding to the control’s cook zone turns red. 4. TempLock: Activates TempLock feature.