Use and Care Manual

20
SETTING SURFACE CONTROLS
Setting induction cooking zones
To operate an induction cooking zone:
1. Turn the cooktop on by pressing the Power key.
2. Place correctly sized cookware on the front
right cooking zone. The zone will become ac-
tive, and the OFF indicator will light up.
Figure 12: Induction cooking zone control
5. When cooking is complete, turn the induction
cooking zone o by pressing its ON-OFF key or
the Power key before removing the cookware.
If all of the zones are o , the cooktop will auto-
matically power o in 30 seconds.
At any time, you can change the setting for an
active cook zone by setting the number to the new
setting.
To activate Power Boost, press the POWER BOOST
3. Press the ON-OFF key for the front right cook-
ing zone. The Power Level Indicator for the
cooking zone will show “0”.
4. Press 4 on the power level selection bar. The
power level indicator will show 4.
indicator.
IMPORTANT
Do not leave empty cookware on an operating
cooking zone. Cookware will heat very quickly
and may be damaged or warped if left on the
cooking zone empty.
NOTE
A cooking zone will not become active without
proper cookware in position. See “Pan Sensing”
on page 15.
If the cooktop does not detect cookware within
30 seconds, it will turn o .