User Manual

ManualsBrandsFrigidaire ManualsAppliancesFrigidaire - Gallery Series 5.7 Cu. Ft. Freestanding Electric Range with Air Fry - Stainless steel

Table Of Contents

Table of contents

808527704 Rev A (September 2019)

TABLE OF CONTENTS

Product Record and Registration . . . . . . . . . . . . . . 2

Important Safety Instructions . . . . . . . . . . . . . . . . . 3

Cooking Recommendations . . . . . . . . . . . . . . . . . . 9

Before Setting Surface Controls . . . . . . . . . . . . . . 12

Setting Surface Controls . . . . . . . . . . . . . . . . . . . . 15

Before Setting Oven Controls . . . . . . . . . . . . . . . . 20

Setting Oven Controls . . . . . . . . . . . . . . . . . . . . . . 21

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 42

Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Summary of content (52 pages)

PAGE 1
TABLE OF CONTENTS Setting Oven Controls . . . . . . . . . . . . . . . . . . . . . . Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 42 48 52 808527704 Rev A (September 2019) Product Record and Registration . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . 3 Cooking Recommendations . . . . . . . . . .
PAGE 2
PRODUCT RECORD AND REGISTRATION Product Record and Registration . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . 3 Cooking Recommendations . . . . . . . . . . . . . . . . . . . . . 9 Before Setting Surface Controls . . . . . . . . . . . . . . . . . 12 Setting Surface Controls . . . . . . . . . . . . . . . . . . . . . . 15 Before Setting Oven Controls . . . . . . . . . . . . . . . . . . . 20 Setting Oven Controls . . . . . . . . . . . . . . . . . . . .
PAGE 3
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR UNPACKING AND INSTALLATION Remove all tape and packaging before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material. Do not remove the wiring label and other literature attached to the appliance. Do not remove model/ serial number plate. Proper Installation—Be sure your appliance is properly installed and grounded by a qualified technician.
PAGE 5
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING THE APPLIANCE WARNING Storage In or On Appliance—Flammable materials should not be stored in an oven or microwave, near surface burners or elements, or in the storage or warmer drawer (if equipped). This includes paper, plastic, and cloth items, such as cookbooks, plastic ware, and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance.
PAGE 6
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR RADIANT COOKTOP CAUTION Wear proper apparel - Loose-fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces. Do not touch surface burners or elements, areas near these burners or elements, interior surfaces of the oven, or the warmer drawer (if equipped). Surface burners and elements may be hot even though they appear cool.
PAGE 7
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR GLASS AND CERAMIC COOKTOPS Do Not Clean or Operate a Broken Cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately. Placement of oven racks - Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot burner or element in oven.
PAGE 8
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR SELF CLEANING OVENS CAUTION Before using self clean, remove broiler pan, any food, utensils, and cookware from the oven, storage drawer or warming drawer (if equipped). Remove oven racks unless otherwise instructed. Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket. Do not use oven cleaners.
PAGE 9
COOKING RECOMMENDATIONS Bakeware The material of bakeware affects how evenly and quickly it transfers heat from the pan to the food. Material Attributes Recommendation Shiny metal bakeware Shiny, aluminum, and non-coated bakeware is the best for even heating. It is suitable for all baked goods. Recommended cooking temperatures and times are based on shiny metal bakeware. Dark metal bakeware Dark bakeware cooks hotter than shiny bakeware.
PAGE 10
COOKING RECOMMENDATIONS Cooking Conditions Conditions in your kitchen can affect the performance of your appliance when cooking food. Condition Aging cookware High altitude Attributes Recommendation As pans age and become discolored, cooking times may need to be reduced slightly. If food is too dark or overcooked, use the minimum cook time in the recipe or packaging. Air is drier and air pressure is lower. Adjust cooking temperature, cooking time, or recipes as needed.
PAGE 11
COOKING RECOMMENDATIONS Cooking Food placement Tips Allow at least 2 inches (5 cm) of space between bakeware for proper air circulation. Broiling / Roasting Broiling pan For best results when broiling, use a broil pan with a broil pan insert designed to drain the fat from the food, help avoid spatter, and reduce smoking. The broiler pan will catch grease spills, and the insert helps prevent grease splatters. If a broiler pan and insert are not supplied, they may be purchased from www.frigidaire.com.
PAGE 12
BEFORE SETTING SURFACE CONTROLS Using Proper Cookware Cookware Material Types The size and type of cookware used will influence the heat setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in Figure 1 and Figure 2. The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom.
PAGE 13
BEFORE SETTING SURFACE CONTROLS About the Ceramic Glass Cooktop About the Radiant Surface Elements The ceramic glass cooktop has heating elements below a smooth glass surface. The designs on the ceramic cooktop outline the areas of the surface elements underneath. Always match the pan size with the diameter of the element outline on the cooktop. Only flat-bottomed cookware should be used. The element temperature rises gradually and evenly. As the temperature rises, the element will glow red.
PAGE 14
BEFORE SETTING SURFACE CONTROLS Element On and Hot Surface Indicator Lights The ELEMENT ON indicator light will turn on when one or more elements are turned on. The HOT SURFACE indicator light will turn on when the burner is hot enough to cause burns and will remain on after the burner is turned off until the surface has cooled to a safe temperature.
PAGE 15
SETTING SURFACE CONTROLS Single radiant surface elements (all models) To operate the single radiant element: 1. Place correctly sized cookware on surface element. 2. Push in and turn the surface control knob in either direction (Figure 5) to the desired setting (refer to the “Suggested radiant surface element settings” in Table 1). 3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.
PAGE 16
SETTING SURFACE CONTROLS Dual radiant surface elements Symbols on the backguard will help choose which portion of the dual radiant element to set. The symbol indicates a setting for the inner element only. The symbol indicates a setting for both inner and outer elements. To operate a dual radiant element: 1. Place correctly sized cookware on the surface element. 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer elements.
PAGE 17
SETTING SURFACE CONTROLS Triple Surface Radiant Element (some models) Symbols around the knob are used to indicate which element of the triple radiant element will heat. The symbol indicates that only the inner element will heat. The symbol indicates that the inner and middle elements will heat. The symbol indicates that the inner, middle and outer elements will heat (Figure 8).You may switch the element setting at any time during cooking. To Operate the Triple Surface Element 1.
PAGE 18
SETTING SURFACE CONTROLS Keep warm (some models) Use the keep warm feature to keep cooked foods hot. Always start with hot food. It is not recommended to heat cold food on the keep warm zone. All food placed on the warming zone should be covered with a lid to maintain quality. For best results, when warming pastries or breads, the cover should have an opening to allow moisture to escape. Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very difficult to clean.
PAGE 19
SETTING SURFACE CONTROLS Home Canning Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) Web site and be sure to read all the information they have available as well as follow their recommendations for home canning procedures. • Use only a completely flat bottom canner with no ridges that radiate from the bottom center when home canning. Heat is spread more evenly when the bottom surface is flat.
PAGE 20
BEFORE SETTING OVEN CONTROLS Oven Vent Location Type of oven racks The oven is vented as shown below. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent. Never close off the openings with aluminium foil or any other material. Steam or moisture may appear near the oven vent. This is normal.
PAGE 21
SETTING OVEN CONTROLS 1 2 3 18 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Oven Control Features 1. Bake - Use to select Bake feature. 2. Broil - Use to set Broil feature. 3. Air Fry - Uses super hot air circulating around food to produce crispy golden results. 4. Conv Bake - Circulates the oven heat evenly and continuously for faster cooking of some foods. 5. Conv Roast - Uses a convection fan to gently brown meats and poultry and seal in the juices. 19 20 16.
PAGE 22
SETTING OVEN CONTROLS Setting the Clock Setting Timer When the appliance is first powered up, 12:00 will flash in the display (Figure 12). The time of day must first be set before operating the oven. The minute timer allows you to track your cooking times without interfering with the cooking process. The timer may be set from a minimum time of 1 minute to a maximum of 11 hours and 59 minutes. To set timer for 5 minutes: 1. Press Timer On-Off. 2. Enter 5 using numeric keypad. 1. Press Set Clock. 3.
PAGE 23
SETTING OVEN CONTROLS Changing between continuous bake setting or 12 hour energy saving The oven control has a factory preset built-in 12 Hour Energy Saving feature that will turn off the oven if the oven is left on for more than 12 hours. The control may be programmed to override this feature to bake continuously. To change between continuous bake or 12 hour energy saving feature: 1. Press and hold Timer On-Off for 3 seconds 2. Press Self Clean to toggle between 12 Hour OFF or Stay On feature (Figure 14).
PAGE 24
SETTING OVEN CONTROLS Operating Oven Lights To set the preheat temperature for 350°F: The interior oven lights will automatically turn on when the oven door is opened. Oven lights will not operate during a Self Clean cycle. For best baking results, do not leave oven light on while cooking. 1. Arrange the interior oven racks. Press to turn the interior oven lights on and off whenever the oven door is closed. 4. 350 and PREHEAT will be displayed while the oven is preheating.
PAGE 25
SETTING OVEN CONTROLS Setting Bake To set Bake for (default) oven temperature of 350°F: Bake cooks with heat that rises from the oven bottom. The heat and air circulate naturally in the oven. A reminder tone will sound indicating when the set bake temperature is reached and to place the food in the oven. The convection fans will turn on in preheat and then cycle on and off as needed during baking. Bake may be set for any oven temperature between 170°F (77°C) to 550°F (288°C). 1. Press Bake.
PAGE 26
SETTING OVEN CONTROLS Convection Bake Convection Bake uses a fan to circulate the oven's heat uniformly around the oven. This improved heat distribution allows for even cooking and browning results. Heated air flows around the food from all sides. Convection bake may be set for any oven temperature between 170°F (77°C) and 550°F (288°C). Benefits of convection cooking include: • Multiple rack baking. • Foods may cook faster, saving time and energy.
PAGE 27
SETTING OVEN CONTROLS Setting Convection Convert Setting Delay Start Pressing the Convect Convert key automatically converts the cooking temperature entered for any standard baking recipe to the lower temperature required for convection baking. Delay Start sets a delayed starting time to oven cooking or cleaning functions. Prior to setting a delay start, be sure the time of day is set correctly. Delay Start must be set before starting the cooking function.
PAGE 28
SETTING OVEN CONTROLS Setting Broil Use the broil function to cook foods that require direct exposure to radiant heat for optimum browning results. Broiling is direct heat cooking and may produce smoke. If smoke is excessive, place food further away from the flames. Broil is preset to 550°F and may be set to any temperature between 400°F (205°C) and 550°F (288°C). WARNING Should an oven fire occur, close oven door and turn off the oven. If the fire continues, use a fire extinguisher.
PAGE 29
SETTING OVEN CONTROLS Important notes: • Always arrange oven racks when the oven is cool. • For best results when broiling, use a broil pan with broil pan insert designed to drain the fat from the food and help avoid spatter and reduce smoking. • When broiling, always pull the oven rack out to the stop position before turning or removing food. • If a broiler pan and insert are not supplied with this appliance they may be purchased from frigidaire.com.
PAGE 30
SETTING OVEN CONTROLS Convection Roast To set Convection Roast: Convection roast combines a cook cycle with the convection fan and element to rapidly roast meats and poultry. Heated air circulates around the meat from all sides, sealing in juices and flavors. Meats cooked with this feature are crispy and brown on the outside while staying moist inside. 1. Place the insert on broiler pan. Place meat (fat side up) on insert. WARNING Should an oven fire occur, close the oven door and turn the oven off.
PAGE 31
SETTING OVEN CONTROLS Convection Roasting tips: • Preheating for convection roast will not be necessary for most meats and poultry. • Arrange oven racks so large cuts of meat and poultry are on the lowest rack of the oven. • Smaller roasts and poultry should be cooked using rack position 2 or 3. • Since convection roast cooks faster, you can reduce cook times as much as 25% from the recommended time of your recipe (check the food at this time).
PAGE 32
SETTING OVEN CONTROLS Air Fry The Air Fry feature works best for single rack baking with packaged and convenience foods and can be programmed for temperatures between 170°F and 550°F. Follow the recipe or package directions for food preparation quantity, time, and temperature. Important: • Air Fry is designed for baking on a single oven rack. Food should be arranged in single layers on a pan. • When using Air Fry, use dark bakeware with low or no sides and place food on rack position 4 for best results.
PAGE 33
SETTING OVEN CONTROLS Cooking with Meat Probe IMPORTANT Use the probe feature for best results when cooking foods such as roasts, hams, or poultry. • Do not store the probe inside the oven. Use only the original probe provided. Connecting any other probe or device could result in damage to the oven control, electronics, and the receptacle. • Before starting Self Clean or during a Broil, make sure the probe is removed from the oven interior.
PAGE 34
SETTING OVEN CONTROLS To set probe: 1. Insert the meat probe into the food. Place prepared food on the desired oven rack position and slide into the oven. 2. Plug the connector end of the probe all the way into the probe receptacle while the oven is still cool. The receptacle is located on the upper left front oven cavity wall. Close oven door. 3. Set oven for Quick Preheat, Bake, Convection Bake, or Convection Roast and set oven temperature. 4. Press START. 5. Press Probe.
PAGE 35
SETTING OVEN CONTROLS To set how the oven will operate once the probe reaches the target temperature: The oven is preset to automatically stop cooking and start the warm feature when probe sensor reaches the target temperature. This probe may be set to continue cooking if desired. Setting the options must be done when the oven is inactive. The probe is not required to be connected to the probe receptacle when setting this option.
PAGE 36
SETTING OVEN CONTROLS Setting the Sabbath Feature (for use on the Jewish Sabbath and Holidays) . CAUTION For further assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at www.star-k.org. Food poisoning hazard. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.
PAGE 37
SETTING OVEN CONTROLS To program oven to Bake with default oven temperature of 350°F and activate the Sabbath feature: 1. Be sure the clock is set with the correct time of day. 2. Arrange oven racks, place bakeware in oven, and close oven door. Press Bake. 3. Press START. 4. Note: If a Delay Start is desired enter the time at this point. See “Setting Delay Start” on page 27 for detailed instructions. 5. Press and hold Self Clean and Steam Clean simultaneously for about 3 seconds to set the Sabbath feature.
PAGE 38
SETTING OVEN CONTROLS Restoring Factory Default Settings Adjusting Oven Temperatures Your appliance was set with predetermined (default) oven control settings. Over time, users may have made changes to these settings. The following options may have been modified since the appliance was new: Your appliance has been factory calibrated and tested to ensure accurate baking temperatures. For the first few uses, follow your recipe times and temperature recommendations carefully.
PAGE 39
SETTING OVEN CONTROLS Self Clean A self cleaning oven cleans itself with high temperatures (well above normal cooking temperatures), which eliminate soils completely or reduces them to a fine powdered ash you can wipe away afterwards with a damp cloth. This function can be programmed for clean times between 2 and 4 hours. Important: Before starting Self Clean read all following caution and important statements before starting a self clean cycle • Remove any excessive spills.
PAGE 40
SETTING OVEN CONTROLS Setting Self Clean Setting Delay Start Self Clean 1. Be sure the oven is empty and all oven racks are removed. Remove all items from the oven. Be sure oven door is completely closed. To start a delay Self Clean with default clean time of 3 hours and a start time of 9:00 o’clock: 2. Press Self Clean and the default 3 hour clean time will appear in the display.
PAGE 41
SETTING OVEN CONTROLS Steam Clean The Steam Clean feature offers a chemical free and time saving method to assist in the routine cleaning of small and light soils. For heavier baked on soils use the Self Clean feature.. CAUTION • Do not add bleach, ammonia, oven cleaner, or any other abrasive household cleaners to the water used for Steam Clean. • Before manually cleaning any part of the oven, be sure all controls are turned off and the oven is cool. The oven may be hot and can cause burns. 8.
PAGE 42
CARE AND CLEANING Remove spills and any heavy soiling as soon as possible. Regular cleaning will reduce the difficulty of major cleaning later. CAUTION • Before cleaning any part of the appliance, be sure all controls are turned off and the appliance is cool. • If ammonia or appliance cleaners are used, they must be removed and the appliance must be thoroughly rinsed before operating. Follow manufacturer's instructions and provide adequate ventilation.
PAGE 43
CARE AND CLEANING Porcelain-enameled broiler pan and insert Porcelain door liner Porcelain body parts Rinse with clean water and a damp cloth. Scrub gently with a soapy, non-abrasive scouring pad to remove most spots. Rinse with a 50/50 solution of clean water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse and wipe dry with a clean cloth. Remove all cleaners or future heating could damage the porcelain.
PAGE 44
CARE AND CLEANING Cooktop Maintenance Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. Prior to using your cooktop for the first time, apply a ceramic cooktop cleaning cream (available in most hardware, grocery, and department stores) to the ceramic surface. Clean and buff with a clean paper towel. This will make cleaning easier when soiled from cooking. Cooktop cleaning creams leave a protective finish on the glass to help prevent scratches and abrasions.
PAGE 45
CARE AND CLEANING Cooktop Maintenance (cont’d) IMPORTANT Damage to the ceramic glass cooktop may occur if you use an abrasive type cleaning pad. Only use cleaning products that have been specifically designed for ceramic glass cooktops. Aluminum Foil and Utensils WARNING Never cover any slots, holes, or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum foil linings may trap heat, causing a fire hazard.
PAGE 46
CARE AND CLEANING Removing and Replacing the Oven Door Oven door hinge locations CAUTION The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To remove the oven door: 1. Open oven door completely, horizontal with floor. Figure 38: Door hinge location 2. Pull up the lock located on each hinge support toward front of the oven until the lock stops. You may have to apply a little upward pressure on the lock to pull it up (Figure 39 and Figure 40). 3.
PAGE 47
CARE AND CLEANING Replacing the Oven Light CAUTION Be sure the oven is unplugged and all parts are cool before replacing the oven light. Remove and replace storage drawer (some models) Use the storage drawer for storing cooking utensils. The drawer can be removed to facilitate cleaning under the range. Use care when handling the drawer. Replacing the oven interior light bulb: The interior oven light is located at the rear of the oven cavity and covered with a glass shield.
PAGE 48
BEFORE YOU CALL Oven Baking For best cooking results, preheat the oven before baking cookies, breads, cakes, pies, pastries, etc. There is no need to preheat the oven for roasting meat or baking casseroles. The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance. Baking Problems and Solutions Baking Problems Causes Cookies and biscuits burn • on the bottom. Cookies and biscuits put into • oven before oven is preheated. • Oven rack is overcrowded.
PAGE 49
BEFORE YOU CALL Solutions to Common Problems: Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the problem listed. Problem Cause / Solution Entire appliance does not operate. Appliance not connected. Make sure power cord is plugged properly into outlet. Check your fuse box or breaker box to make sure the circuit is active. Electrical power outage. Check house lights to be sure.
PAGE 50
BEFORE YOU CALL Problem Cause / Solution Electric Cooktop Problems Surface element is too hot or not hot enough. Incorrect surface control setting. Adjust power level setting. Surface element does not heat or does not heat evenly. Be sure the correct surface control knob is turned on for the element needed. Cookware is light weight or warped. Use only flat, evenly balanced, medium or heavyweight cookware. Flat pans heat better than warped pans.
PAGE 51
BEFORE YOU CALL Problem Cause / Solution Appliance is not level. Be sure the floor is level, strong, and stable enough to adequately support the range. If the floor is sagging or sloping, contact a carpenter to correct the situation. Poor installation. Place the oven rack in the center of the oven. Place a level on the oven rack. Adjust the leveling legs at the base of the appliance until the rack is level. Kitchen cabinet alignment may make range appear not level.
PAGE 52
WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.