User Manual

46
CARE AND CLEANING
Removing and Replacing the Oven Door
To remove the oven door:
1. Open oven door completely, horizontal with floor.
2. Pull up the lock located on each hinge support toward
front of the oven until the lock stops. You may have to
apply a little upward pressure on the lock to pull it up
(Figure 39 and Figure 40).
3. Grasp the door by the sides, and close the door until the
door frame makes contact with the unlocked hinges.
4. Pull the bottom of the door toward you while rotating the
top of the door toward the appliance to completely
disengage the hinge levers (Figure 41).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (Figure 41).
2. Hold the oven door at the same angle as the removal
position. Carefully insert the hinge levers into the oven
frame until you feel the hinge levers are seated into the
hinge notches. The hinge arms must be fully seated into
the hinge notches before the oven door can be fully
opened. (Figure 41).
3. Fully open the oven door, horizontal with floor (Figure
38).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the
locked position (Figure 39).
5. Close the oven door.
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
Special door care instructions - Most oven doors contain
glass that can break. Do not hit the glass with pots, pans,
or any other object. Scratching, hitting, jarring, or
stressing the glass may weaken its structure, causing an
increased risk of breakage at a later time. Do not close
the oven door until all of the oven racks are fully in place.
CAUTION
IMPORTANT
Figure 38: Door hinge location
Figure 39: Door hinge locks
Figure 40: Unlocking door hinge
Figure 41: Replacement and location of hinge arm and
roller pin
Oven door
hinge
locations
Door frame flush
with hinge lock
Hinge
notch