Installation Guide

5
GAS WALL OVEN INSTALLATION INSTRUCTIONS
Installing the Oven
1. Knock out hole on the bottom of the oven, as
shown in figure 5.
2. Insert the oven into the cabinet opening.
3. Pull the cord and gas line through the hole.
4. Push the oven in and against the cabinet.
5. Find the anti-tip mounting screws included in
the screw package and set aside.
2. Cabinet Installation
Figure 5
Knock-out
hole for gas
inlet line
Installing the Anti-tip Mounting Screws
The wall oven can tip when the door
is open. The anti-tip mounting screws supplied with
the wall oven must be installed to prevent tipping of
the wall oven and injury to persons.
A. Locate the appliance mounting screw holes (see
figure 6).
B. Use the screws supplied to fix the appliance to
the cabinet.
Tip Over Hazard
• A child or adult can tip the oven
and be killed.
• Install the anti-tip device to oven
and/or structure per installation
instructions.
• Ensure the anti-tip device is re-engaged when the
oven is moved.
• Do not operate the oven without the anti-tip device
in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
Anti-tip mounting holes
Figure 6
Anti-Tip Mounting Holes