Welcome .................................. 2 important Safety instructions Setting Surface Surface Cooking Care & Cleaning Controls .. 3-4 .... 4-7 ..................... ................. 8 9-10 Before You Call Solutions Common to Problems Warranty Visit the Frigidaire ............................ ................................ "1 "1 12 Web Site at: http://www.frigidaire.com READ AND SAVE THESE INSTRUCTIONS 318200626 (0511) Rev.
Questions? 1-800-944-9044 (United States) 1 =866-294-9911 _Canada) Please attach sales receipt here for future reference. Congratulations on your purchase of a new appliance! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible.Your satisfaction is our number one priority. We know you'll enjoy your new appliance and ThankYou for choosing our product. We hope you consider us for future purchases.
Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This SymbOl wi!l he!p a!ert YoU t0 situati0ns that may cause seriou s b0dily harm death 0[ propertY damage: This symboi Will help alert you to Situations that may Cause bodily injury 0r pr0perty damagel = Remove all tape and packaging wrap before using the appliance.
Theuseofundersized utensilswillexposea portionofthe • surfaceheatingunit to directcontactandmay resultin ignitionofclothing.Properrelationship ofutensiltoelement willalsoimproveefficiency. = Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units. To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil. • Never Leave Surface Units Unattended.
locations of the surface radiant elements Your cooktop is equipped with radiant surface radiant elements with different wattage ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases. The radiant surface elements are located on the 30" cooktop as follows: 2 dual 5 to 7 inch radiant elements located at the right rear and left front positions; 2 dual 6 to 9 inch radiant elements located at the right front and left rear positions.
The electronic surface element control (esec) The Electronic Surface Element Control ("ESEC") feature includes 5 digital display windows. The ESEC featu re provides a numeric digital setting for the 5 radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work except the settings are displayed in digital windows (Figs. 1 thru 4). The available ESEC Display Fig. 1 Settings The ESEC control provides various heat levels from Hi (Fig.
Operating the Single Surface Radiant Elements The 36" cooktop has a single radiant surface element located at center rear (Fig. 1) element position. To Operate the Single Surface Element 1. 2. Place correctly sized cookware on the radiant surface element. Push in and turn the surfacecontrol knob in either direction to the desired setting using the ESEC digital display window to verify (Fig. 2). Turn the knob to adjust the setting as needed. 3.
Selecting Surface Cooking Cookware *CORRECT INCORRECT__ w Cookware should have flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1). Be sure to followthe recommendations q "_ o Curved and warped bottoms. 1_ pan • Flat bottom and straight sides • Tight fitting lids. for using cookware as shown in Figure 2. • Weight of handle does not tilt pan.
i ¸ f Cleaning Various g 7 Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR CLEANING LATER. Surfaces How to Clean Aluminum (Trim Pieces) Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth.
Ceramic Glass Consistent Cooktop and proper Cleaning & Maintenance Cleaning is essential tO maintaining your Ceramic g!ass €o0ktop Prior to using your cooktop for the first time, apply the recommended CERAMA BRYTE® Cleaning Creme to the ceramic surface. Clean and buff with a non abrasive cloth or pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.
Solutions OCCURRENCE Entire cooktop operate. to Common Problems POSSIBLE CAUSE/SOLUTION does not (1) House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. If the problem is a circuit overload, have this situation corrected by a qualified electrician. (2) Service wiring not complete. Contact installation agent or dealer. (3) Power outage. Check house lights to be sure. Call local electric company. Surface element does not heat. (1) No power to appliance.
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance Exclusions with the provided instructions. This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined.