Gas Cooktop mFRIGIDAIRE Owner's Guide CONTENTS Page Versi6n en espaflol ..................................... 2 Product Registration ................................... 2 Important Safety Instructions ................... 3-4 GroundingInstructions ............................... 4 Liquefied Petroleum (Propane) Gas Conversion ................................................. 5 FlameSize .................................................. 5 Proper Burner Adjustment .........................
Product Registration Register Your Product The PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to Electrolux Home Products North America, Thank you for choosing this appliance.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. This guide contains important safety symbols and instructions. Pleasepay special attention to these symbols and follow all instructions given. Here is a brief explanation of the use of these symbols, This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
IMPORTANT SAFETY INSTRUCTIONS (continued) • Use proper pan size--This appliance is equipped with one or more surface burners of different sizes Select utensils having flat bottom large enough to cover the surface burner The use of undersized utensils will expose a portion of the surface burner to direct contact and may result in ignition of clothing Proper relationship of utensil to the surface burner will also improve efficiency, • Do Not Use Decorative Surface Burner Covers.
Liquefied Petroleum (Propane) Gas Conversion Severe shock or damage to the cooktop may occur if the cooktop is not installed by a qualified installer or electrician. This appliance can be used with Natural Gas and Propane Gas. It is shipped from the factory for use with natural gas. If you wish to convert your cooktop for use with Liquefied Petroleum (propane) gas: - Models with Venturi (open} Burners. see the installation instructions guide for the conversion instructions.
Setting Surface Controls The sur_ce control knobs shown below may not look identicalto the SurfaceControB Knobs on your range; They are only representational Venturi (opened) Burner Models To Adjust Low or "Simmer" Setting (some models) The burner flame, at low setting, carl be adjusted if it istoo high or too low; refer to the installation instruction for adjustment procedure, To Adjust Standing Pilot Model (some models) Each burner lights automatically either an electric or a standing pilot, depending
Selecting Surface Cooking Utensils For best results and energy conservation, choose cooking utensils that have these characteristics: *GOOD POOR • Curved and warped pan bottoms. u • Flat bottom and straight sides. • Pan overhangs unit by more than 2.5 cm (1 "). Pansshould have fiat bottoms. Check for • Tightfltting lids, flatness by rotating a ruler across the bob tom. There should be no gaps between the pan and ruler. • Weight of handle does not tilt ...... pan.
1, Canning Tips & Information 2, Canning can generate large amounts of steam, Useextreme caution to prevent burns, Always raise the lid to vent steam away from you. 1 Use tested recipes and follow instructions carefully, Check with your local Cooperative Agricultural Extension Service or a manufacturer of glassjars for the latest canning information. Use fiat-bottomed canners only. Heat is spread more evenly when the bottom surface is flat, 3, 4, Center canner on the burner grate.
General Cleaning Cleaning Various Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. Remove spillovers and heavy soiling as soon as possible. Regular cleaning will reduce the number of major cleaning later. Surfaces How to Clean Aluminum (Trim Pieces) & Vinyl Use hot, soapy water and a cloth. Dry with a clean cloth.
General Venturi Cleaning (continued) (open) Burner Models (somemodels) To Raise and Lower the Top for Cleaning The cooktop is hinged and can be raised to clean the area underneath. Besure ail cooktop controls are turned to OFFand burner grates are cool, 1, Remove controls knobs, burner grates and spillover bowls. Set aside. 2, Grasp the front of the cooktop and lift, Some models have a swing-up rod to support the cooktop in its raised position, 3, Clean under thecooktop.
General Cleaning (continued) Sealed Burner Models (somemodels) Unlike the standard gas range, THIS COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop, Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL, DO NOT use a cooktop cleaner on a hot cooktop, The fumes can be hazardous to your health, and can chemically damage the ceramic- glass surface. Be sure the controls are turned to OFF.
General Cleaning (continued) Sealed Burner Models (somemodels)(continued) To Clean the Ceramic-glass Cooktop (some models) (continued) Special Caution for Aluminum Foil and Aluminum Cooking Utensils 1) Aluminum foil Use of aluminum foil will damage the cooktop.
General Cleaning (continued) Sealed Burner Models (somemodels)(continued) To Clean the Ceramic-glass Cooktop (somemodels) (continued) Use and Care of Glass Surface (continued) Cleaning Materials for Ceramic-Glass Cooktop Some cleaning materials may contain an ingredient which can damage the cooktop. Use recommended cleaning products only (see below). Cleaner cream should be used regularly, First use recommended products listed below, then use cleaner cream.
General Cleaning (continued) Sealed Burner Models (somemodels)(continued) To Clean the Burner Grates, Contoured Burner Pans, Burner Cap and Burner Base The burner grates, contoured burner pans, burner caps and burner base should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame. See instructions below. To Clean the Burner Grates Be sure burners and grates are cool before you place your hand, a pot holder, cleaning cloths or other material on them.
Avoid Service Checklist Beforeyou call for service, review this list, it may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Surface burners do not light. Surface Control knob has not been completely turned to LITE,Push in and turn the Surface Control knob to LITEuntil burner ignites and then turn control to desired flame size.
COOKTOP WARRANTY Your cooktop is protected by this warranty WARRANTY PERIOD FULLONE-YEAR WARRANTY O_7eyearfrom original i_urchase date THROUGHOURAUTHORIZEDSERVICERS, WE WILL: Payall costsfoi rep;_iri_7g or repladng any l_artsof this applia_7ce whirl/ proveto be dc,tectiw, in materialsor THECONSUMERWILLBERESPONSIBLE FOR: Costs of service calls that are lis_ed under NORMAL RESPONSIBILITIES OFTHECONSUMER.