Installation guide

Installation Instructions
CUTOUT DIMENSIONS
Models 27" 30"
(68.6 cm) (76.2 cm)
Height 16_/_" 163/4"
(42.5 cm) (42.5 cm)
Width 25W' 25_//'
(6.5 cm) (6.5 cm)
Depth (min.)* 19_k"or 22" 19W' or 22"
(49.5 cm or (49.5 cm or
56 cm) 56 cm)
• , • , • I Jt
• Mm. depflawlflarecep_leoulslde(abmet19/2 (49.5 cm).
Min. depth wilh re_epla( le inside _abine122" (56cm).
Depth
Height
3" Min.
(7.6cm)
On 27" (68.6 cm) models, allow 1" (2.5 cm) at the lop,
HA€,"(1.75 cm)on the sides and I_A" (3.5 cm)at the
bottom for overlap of the Trim Frame over the edges
of the cutout.
On 30" (76.2 cm) models, allow 1" (2.5 cm) at lhe lop,
2:V_,"(5.6 cm) on the sides and I:V_"(3.5 cm) at the
bottom for overlap of the Trim Frame over the edges
of the cutout.
INSTALL BOTTOM BRACKET
AND BOTTOM DUCT
[] Disconnect the microwave oven before proceeding
with the installation.
[] Faslen lhe botlom bracket to the bottom duct by
using two V2"screws.
_ ½"Screws{2)
[] Remove any loose items inside the microwave oven,
including the turntable and turntable support.
Carefully turn the microwave upside down.
] . 1 /t
Install bottomductw_th four/2 screws as shown.
'r_ Screwws _Screws
i
i
Microwave Oven Upside Down
2