Installation guide

Installation Instructions

[_] INSTALL MICROWAVE OVEN

INTO CABINET

[] Slide the microwave oven part way into the cabinet

opening.

BottomDuct _ Anti-TipAssembly

Anti-_p

Bracket

BottomBracket

[] Plug in the microwave oven.

[]Bottom bracket must be flat to dae cutout floor to

engage correctly wida Ihe ann-tip bracket as shown.

Carefully slide flae microwave back, making sure the

power cord is not mashed or cut.

[] Center the microwave oven within Ihe cutout

opening and slide dae microwave oven in place,

engaging the anti-tip bracket.

[] Ensure the microwave oven is accurately centered.

i/),,Screw

PositioningFlange

[] Drill pilot holes through the posidoning flange and

i tt

then install three /2 screws at the front of the

bottom duct as shown.

I-_ INSTALLING THE TRIM FRAME

[] Place the tlJm frame over the microwave oven.

[] Make sure the trim frame is level and the microwave

oven is centered within the tlim frame. Mark four

center positions through the four mounting holes

of the trim frame.

NOTE: Center the tIim frame equally on all four

sides.

[] Remove the u_im frame and drill four pilot holes.

PilotHole

CutoutOpening

1" Screw

TrimFrame

MountingHole

[] Attach the trim frame by using four screws.

[_ REPLACE ANY LOOSE ITEMS

[] Your trim kit is now fully installed, Replace any

loose items that were removed fi'om the inside of

the microwave oven.

[] Keep these installation instructions for future

reference,

[] Replace house fuse or close circuit breaker.