WASHER LAVE US E www.frigidaire.
Table of Contents Importa nt Safety Instructions ........................................................................................................................... Washing Procedures ......................................................................................................................................... Stain Removal .......................................................................................................................................................
Avoid Grounding firehazardorelectricaltype wall shock.Donotusean receptacle adaptorplugor extension cordor remove grounding prongfromelectrical powercord.Failure to followthiswarning can cause serious injury,fire ordeath. Importan t Safety Read all instructions Do not under any circumstances cut, remove, or bypass the grounding prong from Power this plug Do not useor mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia.
Important Safety Instructions (con 't) Prevent Injury • To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer's reference. Refer to INSTALLATION INSTRUCTIONSfor detailed grounding procedures. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person.
Washing Procedures • Follow the guidelines below for preparing the wash load. Read the Operating Instructions Always read and follow for operating your specific model. fabric care and laundry product labels. To reduce the risk of fire, electrical shock, or injury to persons, read Important // before operating this washer. Sort laundry into loads that can be washed together. Sort items by recommended water temperatures, wash time, and agitate/spin speeds.
Washing Procedures 'continued) 6. Add laundry load to washer. Dry load level should not be higher than the top of the agitator vanes. Do not overload the washer. Do not put items on top of agitator or wrap them around it. Load items evenly. Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. When washing a single heavy item, add 1 or 2 towels to balance the load. Do not load higher than top of agitator 7. vanes.
Stain Removal Safe Stain Removal Procedures To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed in Important Safety Instructions and those listed below • Read and comply with all instructions on stain removal products. Keep products in their original labeled containers and out of children's reach. Thoroughly wash any utensils used. Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Common Washing Problems Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. Forsatisfactory washing results, follow these suggestions provided by The Soap and Detergent Association. PROBLEM POSSIBLE Blue stains Discoloration, graying Greasy, Holes, oily tears, stains or snags SOLUTIONS PREVENTIVE ,Detergent or liquid fabric softener did not dissolve or disperse, ,If caused by detergent, mix 1 cup (240 ml) white vinegar with 1 quart (.
Care and Cleaning Use care with laundry products. They can damage finish on the washer. To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below in important Safety instructions and those listed below. Inside Remove items from the washer assoon asthe cycle ends. Excesswrinkling, color transfer, and odors may develop in items left in the washer. Dry the washer top, the area around the lid opening, and the underside of the lid.
Avoid Service Checklist Before calling for service, review this list. It may save both time and expense. The list includes common concerns that are not the result of defective workmanship or materials in this washer. OCCURRENCE POSSIBLE CAUSE SOLUTION "Clunking" sounds. A certain amount of "clunking" or gear sounds are normal in a heavy-duty washer. This is normal. Foreign objects such as coins or safety pins may be in tub or pump. Stop washer and check tub.
OCCURRENCE POSSIBLE Wash load too wet spin. after Water does not enter washer or it enters slowly, CAUSE Washer is overloaded. Do not overload washer. See Procedures. Load is out of balance. Rearrange load to allow proper spinning. Drain hose is kinked. Straighten Washer lid is open. Close washer lid. The washer will not fill with water, agitate or spin when the lid is open, and will only start to do so if the lid is closed. Water supply is not adequate Water open. Water level cover load.
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
