Use and Care Manual

10
IMPORTANT
Make sure the water line tubing goes
through the hole at the top of the
dispenser pocket. A metal wrap on the
tubing prevents damage from the hinge
rubbing against it. Fix this back around
the tube in the proper location upon
reinstallation (just as long as the tube is
protected from the hinge).

NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure the tube does not kink.
1. Remove three 8 mm bolts from both
top hinges. Lift the doors up o the
lower hinges and carefully set aside.
x2
DOOR REMOVAL
Once both doors are in place, ensure
they are aligned with each other and
level (Reference INSTALLATION for more
details), and replace the top hinge cover.
2. To reinstall the doors, reverse
the procedure.
To remove bottom doors
1. Fully open the bottom doors in order
to remove the bottom hinge cover.
2. Remove the screw and the bottom
hinge cover.
3. Disconnect the switch connector
and detach the wires from the guide.