Use and Care Manual

26
STORAGE FEATURES
Custom-Flex Zone
To remove Custom Flex-Zone shelves
and drawers:
1. Open doors completely to gain
access to shelves/drawers.
2. Pull the shelf/drawer to the stopper.
Lift the shelf/drawer up and pull it to
remove it from the cabinet.
3. Reverse the steps to reinstall the
shelf/drawer.
You can mount the middle drawers in
the freezer and Flex-Zone in up to 3
height positions and can also invert them
90° allowing bottles to be stored in the
Flex-Zone.
Shelves in 3 Height Positions and Inverted
Possible Shelf Configuration Example
To remove the Wine Rack Mat:
1. Unhook the rack from the shelf.
2. Pivot as shown in the image and
remove the silicone mat.
IMPORTANT
You can remove and clean the Wine
Rack Mat with tap water.
IMPORTANT
The Wine Rack Mat helps to keep the
bottles from sliding o when opening
the Custom-Flex Zone drawers.