Use and Care Guide

30
SETTING OVEN CONTROLS
To set a self clean cycle or a delayed start self
clean cycle:
1. Be sure the clock displays the correct time of day.
2. Press Star
t Time. The: in the time of day will flash.
3. Press and hold to sc
roll to the time to start the
delayed self clean cycle. Release the key when the
desire
d time is displayed.
4. Press clean.
--- appears in the display.
5. Press until 3:00 appe
ars in the display for a 3
hour self clean process, or push until 2:00
ap
pears in the display for a 2 hour self clean process.
6. As soon as the controls are set, the motor driven lock
will begin to close automatically and
the door locked
indicator light will flash. Do not open the oven door
while the light is flashing (allow about 15 seconds for
the oven door to lock).
7. CLn
will appear in the display during the self clean
cycle, and the
door locked light will glow until the self
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
When the self clean cycle has completed:
1. The time of day
will appear in the display
window, and
the Self Clean indicator light and Door Locked light will
continue to glow.
2. Once the ove
n has co
oled down for about 1 hour and
the Door Locked light has gone out, the oven door may
be opened.
3. T
o avoid possible burns, use care when opening the
ov
en door after the self cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or
steam to escape.
To stop or interrupt a self clean cycle (once it has
been activated)
:
1. Press OFF.
2. Once the oven has coole
d down for about 1 hour and
the door locked light has turned off, the oven door can
be opened.
3. Rest
art the self clean cycle once all conditions have
been
corrected.
To start a self clean cycle immediately without a delay,
skip Step 2 and Step 3 in the instructions provided below.
IMPORTANT
Whenever the self clean feature is active, you may check
the amount of time remaining in the self clean cycle by
pressing the clean key. Remember the range door cannot
be opened until the range has cooled sufficiently. You will
need to add about 1 hour to the time displayed before you
can use the range for cooking.
When the oven is cool, wipe away any residue or
po
wder
ed ash with a damp cloth or paper towel.
NOTE