Use and Care Guide

42
BEFORE YOU CALL
Other Problems
Appliance is not level. Be sure the floor is level, strong, and stable en
ough to adequately support the range.
If the floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place the oven rack in the center of th
e oven. Place a level on the
oven rack. Adjust the leveling legs at the base of the appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are
squar
e and have sufficient room for appliance clearance.
Cannot move appliance easily.
Appliance mu
st be accessible for
service.
Cabinets not square or are built in too tightly. Contact the builder or installer to make
the appliance accessible.
Carpet interferes with appliance. Provide sufficient sp
ace so the appliance can be
lifted over carpet. Installation over carpet is not advised. See the installation instruc-
tions for guidelines specific to your appliance.
Oven light does not work. Be sure the oven light is secure in the socket. See “Replacing the
Oven Light” on
page 38.
Problem Cause / Solution