FRIGIDAIRE iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ _ ackaging .
This USE & CARE MANUAL instructed in this provides specific USE & CARE MANUAL. may occur. Common sense operating These and caution instructions instructions must be practiced are not when for your model. meant to cover installing, this air conditioner contains a current detection device designed to reduce the risk of fire. Prevent air conditioner condition maintaining only as and situation that any appliance.
CAUTION. I Avoid Injury o Provide units o occasional run ventilation during use. Do not direct or damage to the unit or other airflow at fireplaces or other heat related property sources as this could cause flare ups or make excessively. Do not climb Do not hang on or place objects on outdoor objects off the unit. part of the unit. Do not place containers with liquids on the unit.
Product Registration Record Your Model and Serial Numbers Record in the spaceprovided below the model and serial numbers. On all models, the serialplate is locatedon the outside of the cabinet. Model No. Serial No. Register Your Product The self-addressed PRODUCTREGISTRATIONCARDshould be filled in completely, signed and returned to the Frigidaire Company. Packaging Remove all packaging from inside the carton, inserts placed into the side louvers.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote. DISPLAYS TEMPERATURE/TIME CHECK FILTER -- RESET BUTTON letup/timer cool =_ hi ou o econ med fan only lo A IVA FS J I,FR URN OR UNI ON / OFF L_ SETS MODE --j --SLEEP .
Operating Instructions (continued) TO CHANGE TEMPERATURE SETTING: YOU WILL temp/timer SEE: temp/timer auto rned hi _ fitter lo V 0N-OFF A FAN SPEED steep m lo V 0N-0FF A fitter 1 FAN SPEED reset steep Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C). If you want the display to read the actual room temperature.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE: temp/timer F F m COOl econ cool . fan only econ Ion only timer MODE V ON-OFF A NODE V ON-OFF A Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on DO THIS: some models. PRESS MODE BUTTON (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.
Operating Instructions (continued) TIMER: YOU WILL SEE HOW MUCH TIME IS CHOSEN: DELAY STOP / START FEATURE [ timer temp/timer temp/timer m cool econ Ion B Hr only econ COOl fan only Hr m ON=OFF MODE timer NODE V ON-OFF A THEN DO THIS: FI RST DO THIS: PRESS UP/DOWN BUTTONS PRESS TIMER BUTTON Note: For Delay Stop, the unit must be in the On position. Note: For Delay Start, the unit must be in the Off position.
Operating Instructions (continued) TO CHANGE TEMPERATURE temp/timer DISPLAY: auto med hi m lo V ON-OFF A ] FANSPEED YOU WILL temp/timer fitter reset med hi _ lo auto V steep ON-OFF A fitter 1 FAN SPEED reset steep Note: The control is capable of displaying temperature degrees Fahrenheit or degrees Celsius.
Operating Instructions (continued) Air Directional AUGER WHEELS Louvers Air directional louvers control air flow direction. Your air conditioner has the louver type described below. Auger Type The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheels until the desired Left/Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained.
Before calling forservice, reviewthislist.It maysaveyoutimeandexpense. Thislistincludes common occurrences thatarenot theresultofdefective workmanship ormaterials inthisappliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker. Control is OFF.
Your appliance is covered by a limited five-year warranty. Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined. 2. Product that has been transferred Canada.
