FRIGIDAIRE Packac Air Conditioner Feai ;_ i i WwwXrigida ire:€orn _ i iiiiiiiiiiiiiiiiiiiiiiii iiiiiiii_i_77!i!i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ii_ii_ii_ii_i;;_;_;_;;;;_ _,, [L800_265_8352
This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.
Product Registration Record Your Hodei and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No, Serial No Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.
Operating Instructions (continued) TO CHANGE TEMPERATURE SETrlNG; tamp/timer YOU WILL SEE: temp/timer auto auto hi DO THIS: [] reed mad PRESS A TO RAISE lo to PRESS V TO LOWER Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE; temp/timer temp/timer heat heat [] cool cool DO THIS: energy saver energy PRESS MODE BUTTON fan only [] saver fan only CHOOSE FAN ONLY Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.
Operating Instructions (continued) CHECK FILTER FEATURE YOU WILL SEE: ternp/dmer temp/timer heat heat cool cool [] energy saver iononly [] energy saver [] San on(y PRESS FILTER DO THIS; RESET BUTTON _J_ Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.
Operating Instructions (continued) TO CHANGE TEMPERATURE YOU WILL DISPLAY: SEE; temp/timer DO THIS: PRESSAND HOLD THE UP/DOWN BUTTONS TOGETHER FOR 3 SECONDS Note: The control is capable of displaying temperature TO TURN in degrees Fahrenheit or degrees Celsius. UNIT OFF: hi YOU WILL SEE: hi m reed reed lo lo 1 DO THIS: PRESS ON/OFF BUTTON Note: When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to dissipate residual heat within the unit.
Operating Instructions (continued) The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheel until the desired direction is obtained. AUGER WHEEL Care and Cleaning Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards, Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary.
Before calling forservice, reviewthislist.It maysaveyoutimeandexpense. Thislistincludes common occurrences thatarenot theresultofdefective workmanship or materials inthisappliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Plug Current House fuse blown Control Air from unit does not feel cold enough. Device Tripped. Press the or circuit breaker is OFF. Turn Control Room temperature 60°F Push plug firmly below into wall outlet. RESET button. tripped.
Yourappliance iscovered byafullone-year warranty anda limited 2-5yearwarranty(sealed system). Foroneyearfromyour original dateofpurchase, Electrolux willpayallcostsforrepairing orreplacing anypartsofthisappliance thatprove to be defective inmaterials orworkmanship whensuchappliance isinstalled, usedandmaintained inaccordance withtheprovided instructions.
