Manual

INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
_l_i'_V_'_H_ll_[elFOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
GENERALINFORMATION
The Warm & Serve Drawer can be used:
• As a stand alone appliance
• As a combination Warm & Serve Drawer with a 30" (76 cm) built-in oven mounted above
IMPORTANT: The warmer drawer must be installed on a leveled surface from left to right, rear to front.
Warm & Serve Drawer Dimensions
NOTE: A 60" (152 cm) long cable is supplied with the
Warm & Serve Drawer.
Stand Alone Installation
_-- Warm & Selve Drawer cutout
9 7/8"(25 cm) 30" (76,2 cm) 24 5/8"(62,5 cm)
(72,4 cm) 24_'(81 cm)
8 %" (21,9 cm) 28 3/4" (73 cm)
IMPORTANT: The Warm & Serve Drawer runs off a
single phase three-wire 120 volt, 60 hertz, AC only
electrical supply with ground.
Combination Warm & Serve Drawer/
30" (76 cm) Built=in Oven Installation
B
i
F ,
i
Min. 38 W' (97,8 cm) 28 1/2" (72,4 cm) 24_'(61 cm)
Max. 39" (99,1 cm) 28 3/4" (73 cm)
9