User manual
Description of the appliance
The hood is supplied as an extractor unit and
can also be used with a filtering function by
fitting one charcoal filter.
You will need an original FRIGIDAIRE
charcoal filter for this function (Available from
your local FRIGIDAIRE Service Force Centre).
Attention! Certain models are already equipped
with charcoal filters. The charcoal filters are
attached to one side of the polystyrene protection
panels in the packaging and should be fitted into
place prior to using the cooker hood in the
recirculation version.
Extractor version
In this version fumes are extracted to the
outside via a hose connected to the coupling
ring. Fig. 1.
In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Recirculation Version
The air is filtered through a charcoal filter and
returned to the kitchen through the top grill of
the outlet pipe.
Fix the deflector using 2 screws Ø 3,5x6.5 mm.
Fig. 2.
Fig. 1
Coupling ring
Fig. 2
Control Panel
Best results are obtained by using a low speed
for normal conditions and a high speed when
odours are more concentrated.
Turn the hood on a few minutes before you start
cooking, you will then get an under pressure in
the kitchen. The hood should be left on after
cooking for about 15 minutes or until all the
odours have disappeared. The control switches
are located on the units front panel:
Correct ventilation
If the cooker hood is to work correctly there must
be an under pressure in the kitchen. It is important
to keep the kitchen windows closed and have a
window in an adjacent room open.
ON/OFF
Light
button
OFF
Motor
button
Speed 1
button
Speed 2
button
Speed 3
button