Instruction Manual

NOTICE!
After setting the fixed knives, always tighten the retaining
screws firmly.
Make sure the fixed knives are parallel. If they are not par‐
allel, the fixed knives have to be realigned using the pres‐
sure screws.
9.1.3 Removing the rotor
To remove the rotor, proceed as follows:
1. Open the closing lid.
To fasten the rotor, wedge a piece of wood or similar
material between the rotating knife and the left fixed
knife.
2. Unscrew the hexagon screw in the interior of the rotor.
3. The two threads located on the front side can be used to screw on
the extractor which is included in the scope of delivery. The
extractor can be used to slowly withdraw the rotor.
Maintenance
- 33 -