Manual

4 Initial start-up

Switch on the device only after all work as described in

Chapter 3

‘Installation’ on page 20 has been carried out.

4.1 Switching on

1. Connect the device to the power supply using the cable provided

(device cable with IEC 320/C13 plug).

2. Gerät am Hauptschalter einschalten.

3. The display lights up.

4.2

Function check

1. Grinding station 1 is moved into the loading position.

2. The grinding chamber cover opens.

3. Check if grinding station 1 is empty (no bowl inserted).

4. Press BUTTON "2" on the display.

5. Grinding station 2 is moved into the loading position.

6. Check if grinding station 2 is empty.

7. Press the "<" button for confirmation and to access the main

menu.

8. Press the "Menu" button.

Initial start-up

- 24 -