Specifications

ManualsBrandsFromPlainToBeautifulInHours ManualsCeiling TilesSunset Boulevard 2 ft. x 2 ft. Drop-in or Glue-Up PVC Ceiling Tile

Page 1 of 9

REPORT NUMBER: 100290066SAT-002A

ORIGINAL ISSUE DATE: December 30, 2010

REVISED DATE:

EVALUATION CENTER

Intertek Testing Services NA Inc.

16015 Shady Falls Road

Elmendorf, TX 78112

RENDERED TO

Wenzhou Atlantic Import & Export Co., Ltd.

4A Commercial building Qiangjian road longwan zone.

Wenzhou city Zhejiang China

TEST REPORT

Report of Testing “Design No.:#28” for compliance with the applicable

requirements of the following criteria:

ASTM E84-10 TEST FOR SURFACE

BURNING CHARACTERISTICS OF BUILDING MATERIALS (UL 723, UBC 8-1, NFPA

255)

Summary of content (9 pages)

PAGE 1
Page 1 of 9 REPORT NUMBER: 100290066SAT-002A ORIGINAL ISSUE DATE: December 30, 2010 REVISED DATE: TEST REPORT EVALUATION CENTER Intertek Testing Services NA Inc. 16015 Shady Falls Road Elmendorf, TX 78112 RENDERED TO Wenzhou Atlantic Import & Export Co., Ltd. 4A Commercial building Qiangjian road longwan zone. Wenzhou city Zhejiang China Report of Testing “Design No.
PAGE 2
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd. December 30, 2010 Page 2 of 9 ABSTRACT Specimen I. D. “Design No.:#28” Test Standard: ASTM E84-10 TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS (UL 723, UBC 8-1, NFPA 255) Test Date: Client: December 30, 2010 Wenzhou Atlantic Import & Export Co., Ltd.
PAGE 3
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd. December 30, 2010 Page 3 of 9 I. INTRODUCTION This report describes the results of the ASTM E84 TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS a method for determining the comparative surface burning behavior of building materials.
PAGE 4
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd. December 30, 2010 Page 4 of 9 II. PURPOSE The ASTM E84 (25 foot tunnel) test method is intended to compare the surface flame spread and smoke developed measurements to those obtained from tests of mineral fiber cement board and select grade red oak flooring.
PAGE 5
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd. December 30, 2010 Page 5 of 9 V. DESCRIPTION OF TEST SPECIMENS Date Received: 12/15/2010 Date placed in the conditioning room: 12/15/2010 Conditioning (73°F & 50% R.H.): 15 days Specimen Width (in): 23.75 Specimen Length (ft): 24 Specimen Thickness (in): 0.16 Material Weight: N/A Total Specimen Weight (lbs): Adhesive or coating application rate: 5 N/A Mounting Method: The specimen was self-supporting.
PAGE 6
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd. December 30, 2010 Page 6 of 9 VI. TEST RESULTS & OBSERVATIONS The test results, computed on the basis of observed flame front advance and electronic smoke density measurements are presented in the following table. Test Specimen “Design No.:#28” Flame Spread Index Smoke Developed Index 0 40 The data sheets are included in Appendix A.
PAGE 7
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd.
PAGE 8
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd.
PAGE 9
Project No. 100290066SAT-002A Wenzhou Atlantic Import & Export Co., Ltd.