Primo Operating Instructions

Selecting a Loca-

tion – General In-

formation for

Fronius Primo

10.0–15.0

Please note the following criteria when choosing a location for the inverter:

Only install on a solid surface

Max. ambient temperatures:

-40°F to +140°F

(-40°C to +60°C)

Relative humidity:

0–100%

The air flow direction within the

inverter is from right to top (cold

air intake on the right, hot air out-

flow at the top).

When installing the inverter in a switch cabinet or similar closed environment, it is neces-

sary to make sure that the hot air that develops will be dissipated by forced-air ventilation.

If you wish to install the inverter on the outer walls of a cattle shed, it is important to main-

tain a minimum clearance of 6 ft. 7 in. (2 m) between all sides of the inverter and air vents

and other openings.

The place of installation should not be exposed to ammonia, corrosive gases, salts, or ac-

ids.

4 in.

100 mm

4 in.

100 mm

8 in.

200 mm

-40 °F - +140 °F

-40 °C - +60 °C

0 - 100 %