Primo Operating Instructions

24
Notes on Clipping the Inverter into the Wall Bracket
Clipping the In-
verter onto the
Wall Bracket
The side areas of the housing cover are de-
signed to function as carrying grips and/or
handles.
The fixing screws in the data communication area of the inverter are used to fix the inverter
to the wall bracket. Fixing screws must be properly tightened to ensure correct contact be-
tween the inverter and the wall bracket.
ON
OFF
Lock
22.1 lbf.in / 2.5 Nm
NOTE! The inverter is fitted with a
lock for safety reasons, which al-
lows the inverter to be pivoted in
the wall bracket only when the DC
main switch is off.
- Only clip on and pivot the in-
verter in the wall bracket
when the DC main switch is
off.
- Do not use excessive force to
clip on the inverter and pivot
it.
CAUTION! Danger of damaging the inverter due to improperly tightened fixing
screws.
Improperly tightened fixing screws may cause arcs to occur when the inverter is
operated, which may lead to fire. Always tighten the fixing screws with the speci-
fied torque.