Manual

For Fronius Galvo/Fronius Symo/Fronius Primo only and when linking multiple invert-

ers in Fronius Solar Net:

Set the Fronius Solar Net master/slave switch on the Fronius Datamanager 2.0 plug-

in card as required

- One inverter with Fronius Datamanager 2.0 = master

- All other inverters with Fronius Datamanager 2.0 = slave (the LEDs on the Fro-

nius Datamanager 2.0 plug-in cards are off)

Switch the device to service mode

Inverter with Fronius Datamanager 2.0 plug-in card:

- Switch the IP switch on the Fronius Datamanager 2.0 plug-in card to position A

- Activate the WIFI Access Point via the Setup menu of the inverter

(the performance of this function depends on the inverter software)

Fronius Datamanager Box 2.0:

- Switch the IP switch on the Fronius Datamanager Box 2.0 to position A

The inverter/Fronius Datamanager Box 2.0 establishes the WLAN Access Point. The

WLAN Access Point stays open for one hour.

Download Fronius Solar.web App

Run Fronius Solar.web App

Stand by

WiFi Access Point

DATCOM

USB

Clock