User's Manual

The keyboard will automatically enter standby mode for power save when it hasn’t been
used for a period of time or it has been disconnected the connection.
Power Switch:
Mechanical power switch version: Slid the mechanical switch to ON/OFF position for
power ON/OFF.
Power ON: Bluetooth pairing LED will flash thrice.
Electronic power switch version:
Press and hold the POWER button until the power LED be turned ON or OFF for turning
the power ON or OFF.
Power ON: Power LED will light up and Bluetooth Pairing LED will flash thrice. The power
LED will go off if the power button without any operation in 30 seconds.
Troubleshooting
The Keyboard does not work
If the keyboard fails to operate, or operates incorrectly, follow the steps below before
seeking assistance.
Make sure the power of the iPad™ or iPad™ 2 and the keyboard are both turned on.
 Make sure the Bluetooth of the iPad™ or iPad™ 2 is activated.
 Make sure the keyboard is within the operating distance.
 Make sure the battery of the keyboard is charged.
 Make sure the keyboard has been paired with the iPad™ or iPad™ 2.
 Make sure the keyboard is connected to the iPad™ or iPad™ 2.
If, after verifying the steps above, the Bluetooth keyboard does not work or work not
correctly, try the following:
 Turn off the power of the iPad™ or iPad™ 2.
 Wait for a few seconds, then turn on the power of the iPad™ or iPad™ 2.
a. Turn off the power of the Keyboard.
b. Wait for a few seconds and then turn on the power of the keyboard.
 Repair the keyboard and the iPad™ or iPad™ 2.
WARNING
 Read, understand, and follow all instructions, cautions and warnings listed in this
manual and any other electronic device manual that will be operated with this
keyboard.
 Keep away from direct sunlight and in extreme temperatures.
 Do not use sharp object such as knife and razor blade over the keyboard.
 When folded, do not squeeze the keyboard.
 Keep away from areas exposed to dirt or liquids.