-Drawer Tool Cart Model No:TC302 IMPORTANT: Please read this manual before using this tool cart and save it for reference.
• To reduce the risk of serious injury, read the following safety instructions before assembling and using . the cart • The product should be positioned on a level surface. • Any assembly or maintenance of the product must be carried out by adults only. • Arrange for necessary manpower when assembling and moving the cart. • Check all nuts and bolts periodically for tightness. When required, tighten. them again. • Do not exceed the following weight limits for this product. Maximum load: 165 lb (75.
Model No TC302 SPECIFICATIONS SPECIFICATIONS 165 lb (75 kg) 50 lb (22.7 kg) 100 lb (45.
KEY PARTS DIAGRAM 4 KEY PARTS DIAGRAM B) Leg 4 PCS A) Upper tray with EVA mat 1PC C) Middle tray 1PC E) Handle 1PC H) Side tray 1 PC L) Bolt M8 x 16 16PCS D) Bottom tray 1PC F) Fixed castor 2 PCS I) Bolt M6 x 12 26 PCS M) Nut M6 18 PCS J) Nut M8 16 PCS G) Swivel castor 2 PCS with brake K) Washer M8 16 PCS N) Bolt M6 x 3 4PCS
Model No TC302 ASSEMBLY ASSEMBLY 1. Mount the castors to the bottom tray. Bolt the two fixed castors (F) to one side of the bottom tray (D) with eight M8 x 16 bolts (L), eight M8 washers (K) and eight M8 nuts (J). Bolt the two swivel castors (G) to the other side of the tray with eight M8 x 16 bolts (L), eight M8 washers (K) and eight M8 nuts (J). (D) (G) (L) (K) (F) (J) 2. Attach the four upright legs (B) to the bottom tray (D) with eight bolts (I) and eight M6 nuts (M) as shown below .
4. Remove the drawer from the upper tray (A), and attach to the top of the four legs with eight bolts (I) as shown below. (A) (I) 5. Attach the handle (E) to the end with the swivel castors (G) using four bolts (N) and two nuts (M). (E) (M) (N) 6. Attach the side tray (H) to the drawer with two M6×12 bolts (I) as shown below. You can use your tool cart now.
WARRANTY 7 Model No TC302 SAFETY WARNINGS AND CAUTIONS DO NOT stand on this product . You may fall which may cause personal injury. When moving this product, do not pull it. Push the product to prevent personal injury. BE CAREFUL when opening the drawer. The product may become unstable and tip, which may cause personal injury or product damage. DO NOT mount this product on a truck bed or any other moving object. This may cause pesonal injury or product damage. DO NOT step in/on the drawer.