Instructions / Assembly

Model No TC302

ASSEMBLY

(F)

(G)

(D)

(L)

(J)

(B)

(I)

(M)

(C)

Mount the castors to the bottom tray. Bolt the two ﬁxed castors (F) to one side of the

bottom tray (D) with eight M8 x 16 bolts (L), eight M8 washers (K) and eight M8 nuts (J).

Bolt the two swivel castors (G) to the other side of the tray with eight M8 x 16 bolts (L),

(K)

(I)

(M)

Attach the four upright legs (B) to the bottom tray (D) with eight bolts (I) and eight M6 nuts

(M) as shown below . Ensure the legs (B) are attached to the outside of the bottom tray (D).

Ensure the legs are in the right direction with the two holes at the bottom and six holes on

Put the middle tray (C) in the middle of the four legs and ﬁx it with eight bolts (I) and eight

M6 nuts (M) as shown below.

(D)

(B)

Note: The assembly screws for the legs and trays should be loosely fastened during assembly, then fully

tightened once all legs and trays are assembled.

eight M8 washers (K) and eight M8 nuts (J).

the top.