Installation Guide

STEP 5 Measuring & Cutting Aluminum Side Jamb Covers
Images I & H Measure both the left and the right side jambs from the header jamb cover
to the sill.
I H
Images J & K Transfer these dimensions to the face of the vertical aluminum jamb cover.
Cut the new bottom of each side jamb to match the sill angle on door sill.
J K
STEP 6 Apply Aluminum Side Jamb Cover Covers
Image L Holding the right side jamb cover in place, push the jamb cover hard inward
toward the entry door. This will compress the jamb cover tight to the wood
jamb. Attach right side jamb cover to existing wood with the pan head
screws provided through the pre-drilled holes.
Repeat for the left side jamb cover.
L L
Measure from the top
of the sill to the
bottom of the head
jamb cover.
Transfer the side
dimension to the
aluminum side
jamb cover.
Screw to door jamb between
the jamb cover locking points
with pan head screws.
Rev. 04.22.16 Form 32508 Page A-4