Installation Guide

STEP 10 Apply Aluminum Brickmould Side Casing
Image R Align the right side brickmould
R
casing locking legs with right side
jamb cover locking legs. Miters of both
the right side and header brickmould
must be in alignment. Using a rubber
mallet, tap brickmould side casing
onto the jamb cover locking legs.
Repeat for the left side jamb brickmould.
STEP 11 Caulking - The last step!
Images S & T Caulk the corners at both miter joints and at the sill using a color matched caulk.
(not included)
S T
The brickmould casing
snaps onto the locking legs
on the jamb covers.
Rev. 04.22.16 Form 32508 Page A-6