User Manual

31/07/12 12:25 PM
Page 4 of 13http://www.rchacker.com/projects/turnigy-9x/frsky-dht-module-ins…n?tmpl=%2Fsystem%2Fapp%2Ftemplates%2Fprint%2F&showPrintDialog=1
Back of the back.
The back of the front.
Now you want to take out the main board. There are 9 screws 5 more plugs and the lcd ribbon to remove.
Be careful with the LCD ribbon it is fragile. Push the two black tabs upwards at the same time and it slides right out.
The marked pins are the base of the module pins. Most others solder the DHT module on here we will not. I've noted it
here just for reference. I made a mistake here the +5 is actually the voltage of your battery and is turned on and off with
the main switch. From the specs the module can handle from 6 to 13 volts, no worries.