Operating Manual

INOVA DAS Operating Manual

1.1

FCC/IC Warning Statements

1.1.1

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class A digital device.

These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

1.1.2

FCC Part 15.21 statement

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment

1.1.3

Health and Safety Warnings

This system can be operated by approved operator only and operator should observe the warning

sentence of operating manual.

The operator who can install, operate or handle related system service should acquaint themselves

this manual.

Control and configuration of this system should be set up according to purpose of use (Refer to the

manufacturer’s product information), it has to be satisfied prescribed request items.

Operator should turn off the main power switch before installing system, maintenance and related

works.

If this product is disassembled intentionally, it can bring electric shock, breakdown, malfunction and

static with losing life and property. Do not disassemble, repair and modify product.

This system cover should be (door) securely fastened in open position, e.g. by tying it up, at outdoor

Safety & Certification Notice