INOVA DAS Bluetooth Manual INOVA DAS Bluetooth Manual Document Reference Company: Fiber Radio Technologies Version: Ver 1.0 Document Status: Release 1 Issue Date: 2019. 01. Department: R&D Group 2 Author Manager: Jun Hyun, Lee PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual ▪ Copyright The copyright of this manual is from FRTek Co., Ltd. This manual may not be reproduced, distributed, modified on any form without the consent of FRTek Co., Ltd Unauthorized disclosure, distribution, copying or use of the information contained in this document in whole or in part without authority is strictly prohibited. ▪ Trademark The trademarks mentioned in this manual are registered trademarks of the respective company.
INOVA DAS Bluetooth Manual Revision History Version Issue Date Details of Revision Author V 1.0 19. 01. 02. Original Jun Hyun, Lee Authorizing Manager This manual is produced by R&D Group 2 Printed in FRTek. PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual Contents Chapter 1. Safety & Certification Notice ..................................................................................................... 6 1.1 FCC Warning Statements ...................................................................................................................... 7 1.1.1 FCC Part 15.105 statement ............................................................................................................ 7 1.1.2 FCC Part 15.21 statement ........
INOVA DAS Bluetooth Manual Figures Figure 1. Basic Network Configuration. ..................................................................................................... 12 Figure 2. EHUB Configuration. ..................................................................................................................... 15 Figure 3. ERU Configuration. ........................................................................................................................ 16 Figure 4.
INOVA DAS Bluetooth Manual Chapter 1 Safety & Certification Notice 1.1 FCC & IC Warning Statements 1.2 Certification Notice PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual Safety & Certification Notice 1.1 FCC Warning Statements 1.1.1 FCC Part 15.105 statement - This equipment has been tested and found to comply with the limits for a Class A digital device. - These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
INOVA DAS Bluetooth Manual - The operator who can install, operate or handle related system service should acquaint themselves this manual. - Control and configuration of this system should be set up according to purpose of use (Refer to the manufacturer’s product information), it has to be satisfied prescribed request items. - Operator should turn off the main power switch before installing system, maintenance and related works.
INOVA DAS Bluetooth Manual Please be informed that the temperature of the surface is too high. Please be careful. The label is attached to the front of the equipment and the PSU (Power Supply Unit). • [FCC] RF/IC Exposure Statements To ensure compliance with FCC and ISED RF exposure requirements this device must be installed to provide a minimum of 20cm between the antenna and people.
INOVA DAS Bluetooth Manual This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
INOVA DAS Bluetooth Manual Chapter 2 System Overview 2.1 System Overview 2.2 System Network PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual System Overview 2.1 System Overview INOVA DAS is a system that can provide high quality telecommunication quality and data telecommunication service both in-building Also, this system is a DAS (Distributed Antenna System) system, a digital system capable of accommodating a plurality of frequency bands, available for public and private facilities. INOVA DAS helps improve poor telecommunication in-building wireless environments.
INOVA DAS Bluetooth Manual MHU is connected to the base station with wired RF cable, and connected to the lower EHUB equipment with optic cable. EHUB is connected to ERU with wired Cat.7 cable, optic signal is converted into Ethernet signal and transmitted to ERU or the Ethernet signal is converted into optic signal and transmitted to MHU. Each branch of the MHU can each be connected cascade with 2 EHUBs for operation, EHUB can be connected up to total of 4 ERUs.
INOVA DAS Bluetooth Manual Chapter 3 System Configuration 3.1 EHUB Figure and Configuration 3.2 ERU Figure and Configuration PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual System Configuration 3.1 EHUB Figure and Configuration EHUB is a structure that can be used in-building, enclosure is minimized considering installation space and operator's convenience. EHUB converts optic signal to Ethernet signal or converts Ethernet signal to optic signal EHUB functions can be simply described as the following. - Function to convert optic signal into RF signal, amplify and service through antenna.
INOVA DAS Bluetooth Manual 3.2 ERU Figure and Configuration ERU is a structure that can be used in-building, enclosure is configured as ceiling fixed type. ERU is configured with ERPSU, ERDTU, ERCPU, 4 ERFUs (ERU RF unit) and can support up to 6 frequency bands. ERU functions can be explained as the following. - Converts Ethernet signal to RF signal, amplifies and services through antenna. (Downlink) - Converts RF signal to Ethernet signal, transmits to upper equipment. (Uplink) - 700MHz, 850MHz, 1.
INOVA DAS Bluetooth Manual Chapter 4 Bluetooth Connection PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual Bluetooth Connection INOVA DAS is implemented with Bluetooth function for user's convenience. ROU is configured with Bluetooth port, and GUI access is available remotely through Bluetooth. Connect Bluetooth antenna to ROU’s Bluetooth port, and turn on the ROU power. Then go to the control panel - hardware and sound - device and printer window, click right button of the mouse and click the add device button.
INOVA DAS Bluetooth Manual Chapter 5 System Installation 5.1 Tools 5.2 EHUB Installation 5.3 ERU Installation PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual System Installation “This manual is to provide product installation method and product information to the user operating the INOVA DAS system, the repeater manager who uses the operation manual needs to require professional knowledge and experience on construction operation of repeater systems. “ This chapter explains how to connect power cables and how to install each equipment and optic cable.
INOVA DAS Bluetooth Manual Other cables and components needed for installation are as below. No. Tools No. AC Cable 1 Tools INOVA Harness Cable 2 INOVA RF Cable 3 Ground Wire Line 4 Optic Connector Cleaner 5 LC-type Optic Fiber 6 Optic Module 7 SMA Cable 8 ANT RF Cable 9 Bracket Bolt/Nut 10 UTP Cable 11 PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual 5.2 EHUB Installation 5.2.1 Product Installation EHUB is configured to one enclosure, can be installed to wall through mounting bracket Figure 4. EHUB Required Door Space. Since EHUB is configured with door, for ease of process, 400mm space on the equipment right side must be secured, and more than 672mm installation space is needed from installation wall. Figure 5. EHUB Anchor Bolt Assemble. Above figure is a simple drawing for the wall face.
INOVA DAS Bluetooth Manual Figure 6. EHUB Wall Installation Assemble. Above figure is the assemble drawing of EHUB wall installation. The assemble orders are as below. 1. Insert bakelite to M16 Anchor Bolt, and locate EHUB according to M16 Anchor Bolt location. 2. Insert M16 Insulation Bushing, M16 Plane Washer, and M16 Spring Washer. 3. Tighten M16 Hex, Nut using spanner. 5.2.2 Ground Cable Connection Figure 7. EHUB Ground Cable Connection. PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual Enclosure grounding and building grounding is connected in order to stable and protect EHUB equipment from electrical danger. 5.2.3 Power Cable Connection EHUB uses AC120V(60Hz) as main power, and power cable includes plug. Below is the pin specification of AC power cable, when connecting power, polarity of each pin must be checked. MS Connector Pin Name Name Description Length(mm) A AC_H AC Hot 1800 B AC-N AC Neutral 1800 C F.G Frame Ground 1800 Figure 8.
INOVA DAS Bluetooth Manual Figure 10. ERU Ceiling Installation Assemble. Above figure is the assemble drawing of EHUB ceiling installation. The assemble orders are as below. 1. Insert bakelite to M8 Anchor Bolt, and locate ERU according to M8 Anchor Bolt location. 2. Insert M8 Insulation Bushing, M8 Plane Washer, and M8 Spring Washer. 3. Tighten M8 Hex, Nut using spanner. 5.3.2 Product Wall Installation Figure 11. ERU Anchor Bolt Wall Assemble. ERU can be installed on the wall through mount bracket.
INOVA DAS Bluetooth Manual Figure 12. ERU Wall Installation Assemble. Above figure is the assemble drawing of ERU wall installation. The assemble orders are as below. 1. Insert bakelite to M8 Anchor Bolt, and locate ERU according to M8 Anchor Bolt location. 2. Insert M8 Insulation Bushing, M8 Plane Washer, and M8 Spring Washer. 3. Tighten M8 Hex, Nut using spanner. PRIVATE AND CONFIDENTIAL © 2019 FRTEK CO., LTD.
INOVA DAS Bluetooth Manual Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: FR-RLWFEHUBUC, FR-RLWFDL24UC Responsible Party FRTek US, LLC Street Address : 181 Metro Drive, Suite 580, City State : San Jose, CA Zip Code : 95110 Telephone number or internet contact information +1-510-390-1939 / milla.woo@frtek.com FCC Compliance Statement This device complies with Part 15 of the FCC Rules.
