User Manual

INOVA DAS Bluetooth Manual

Bluetooth Connection

INOVA DAS is implemented with Bluetooth function for user's convenience. ROU is configured with

Bluetooth port, and GUI access is available remotely through Bluetooth.

Connect Bluetooth antenna to ROU’s Bluetooth port, and turn on the ROU power. Then go to the

control panel - hardware and sound - device and printer window, click right button of the mouse and

click the add device button.

In the list of devices to be added, the Bluetooth module available for connection will be searched.

As the picture above, select the I-STORM module from the list. The Bluetooth name can be changed

by setting, if the device cannot be searched, recheck the connection between the Bluetooth and the

Main Board.

Click on 'enter the device connection code' item. Then input the device connection code.

(Default : 1234)

When the device connection code has been correctly input, window will show as the above picture.

When the window appears, click the 'close' button.

Open the Device manager window, and check if 2 new Comports are added in the PC. Normally it

would take 10~15 seconds to confirm. Also, the Comport number will be set randomly.

Access the Local GUI, and check the Comport assigned to the Bluetooth. Select the faster number of

the Comport number and access to GUI. (If there are COM23 and COM24, then select COM23.)